Acura Code P0502

Drivers of Acura cars with the P0502 code should pay close attention to the cause of this diagnostic trouble code. A P0502 indicates that the Vehicle Speed Sensor (VSS) circuit has a low input, meaning the car is not accurately detecting the speed at which it is traveling. This can be caused by a number of issues, such as an open VSS signal circuit, an open VSS power circuit, a faulty VSS, an open VSS ground circuit, and more. Knowing the various causes and solutions of a P0502 code can help drivers better manage the situation and make sure their Acura is running at its best.

Causes and Solutions for Acura Code P0502

Cause Solution
VSS signal circuit is open or shorted to ground Check the wiring harness for any issues and ensure there is continuity between the VSS and the PCM
VSS power circuit is open Check the Meter 10A fuse and replace if necessary
VSS ground circuit is open between the sensor and ground Inspect the ground connection and rectify any loose or corroded wires
VSS is damaged or has failed, or the VSS rotor is cracked Replace the VSS or the VSS rotor as needed
PCM has failed Replace the PCM if necessary

When a driver’s Acura car is showing the code P0502, it’s important to understand the potential causes and the solutions for each one. The Vehicle Speed Sensor (VSS) is a device that measures the speed of the car, and it can indicate a low input if it’s not functioning correctly. This can be caused by an open VSS signal circuit, a faulty VSS power circuit, an open VSS ground circuit, a damaged or failed VSS, or a cracked VSS rotor. Knowing the various causes and solutions can help drivers better manage the situation and make sure their Acura is running at its best.

VSS Signal Circuit Is Open or Shorted to Ground

If the Vehicle Speed Sensor (VSS) signal circuit is open or shorted to ground, it can cause the code P0502 to appear in an Acura car. To fix this, drivers should check the wiring harness for any issues and ensure that there is continuity between the VSS and the PCM.

VSS Power Circuit Is Open

If the VSS power circuit is open, drivers will likely need to check the Meter 10A fuse and replace it if necessary. This can often help restore normal operation to the VSS and fix the code P0502.

VSS Ground Circuit Is Open Between the Sensor and Ground

Sometimes, an open VSS ground circuit between the sensor and the ground can be the cause of the code P0502. To fix this issue, drivers should inspect the ground connection and rectify any loose or corroded wires.

VSS Is Damaged or Has Failed, or the VSS Rotor Is Cracked

If the VSS is damaged or has failed, or the VSS rotor is cracked, it can cause the code P0502 to appear. In this case, drivers will need to replace the VSS or the VSS rotor as needed.

PCM Has Failed

Finally, the P0502 code can be caused by a failed PCM, which will require a replacement if necessary.

Conclusion

Acura drivers who are dealing with the code P0502 should be aware of the various causes and solutions associated with it. Knowing the various causes and solutions can help drivers better manage the situation and make sure their Acura is running at its best. If the Vehicle Speed Sensor (VSS) signal circuit is open or shorted to ground, drivers should check the wiring harness. If the VSS power circuit is open, drivers should check the Meter 10A fuse and replace it if necessary. If the VSS ground circuit is open, drivers should inspect the ground connection and rectify any loose or corroded wires. If the VSS or the VSS rotor is damaged or has failed, drivers should replace it as necessary. Finally, if the PCM has failed, drivers will need to replace it. All of these solutions can help drivers address issues related to Acura Code P0502 and make sure their Acura car is running at its best.

https://www.youtube.com/watch?v=R_R8lVJWymE

5/5 - (247 votes)

Leave a Comment