The Dodge Code B0028-13 is a code used to delineate the 1st Row Right Seat Mounted Side Squib 1 – Circuit Open when the Occupant Restraint Controller (ORC) is powered. This code is used to determine the integrity of the squibs and wiring and is maintained in a “floating” configuration at the module. This code can point to a number of potential causes including RIGHT SEAT SQUIB 1 LINE 2 CIRCUIT OPEN, RIGHT SEAT SQUIB 1 LINE 1 CIRCUIT OPEN and OCCUPANT RESTRAINT CONTROLLER (ORC) failures. Understanding the cause and potential solutions of Dodge Code B0028-13 is extremely important in order to ensure the safety of the vehicles occupants.
Causes and Solutions of Dodge Code B0028-13
Cause | Solution |
---|---|
RIGHT SEAT SQUIB 1 LINE 2 CIRCUIT OPEN | Check the wiring of the RIGHT SEAT SQUIB 1 LINE 2 for corrosion or damage |
RIGHT SEAT SQUIB 1 LINE 1 CIRCUIT OPEN | Replace the RIGHT SEAT SQUIB 1 LINE 1 if it is found to be damaged |
RIGHT SEAT AIRBAG | Inspect the RIGHT SEAT AIRBAG for any signs of wear and tear |
OCCUPANT RESTRAINT CONTROLLER (ORC) | Replace the OCCUPANT RESTRAINT CONTROLLER (ORC) if it is found to be faulty |
RIGHT SEAT SQUIB 1 LINE 2 CIRCUIT OPEN
When diagnosing Dodge Code B0028-13, the first step is to check the wiring of the RIGHT SEAT SQUIB 1 LINE 2 for corrosion or damage. If the wiring is found to be corroded or damaged, it should be replaced immediately. If the wiring is not damaged, then it is recommended to check the RIGHT SEAT SQUIB 1 LINE 2 for any signs of wear and tear.
RIGHT SEAT SQUIB 1 LINE 1 CIRCUIT OPEN
If the RIGHT SEAT SQUIB 1 LINE 1 is found to be damaged, then it should be replaced as soon as possible. It is important to take care when replacing the RIGHT SEAT SQUIB 1 LINE 1, as any mistakes can cause further damage and system malfunctions.
RIGHT SEAT AIRBAG
Inspecting the RIGHT SEAT AIRBAG is also important when diagnosing Dodge Code B0028-13. The RIGHT SEAT AIRBAG should be checked for any signs of wear and tear, as a faulty airbag can cause the Dodge Code B0028-13 to appear. If the airbag is found to be faulty, then it should be replaced immediately.
OCCUPANT RESTRAINT CONTROLLER (ORC)
Finally, if all other potential causes have been eliminated, then it is likely that the OCCUPANT RESTRAINT CONTROLLER (ORC) is the cause of Dodge Code B0028-13. If this is the case, then the OCCUPANT RESTRAINT CONTROLLER (ORC) should be replaced as soon as possible in order to restore the system’s integrity and ensure the safety of the vehicle’s occupants.
Conclusion
In conclusion, Dodge Code B0028-13 is used to delineate the 1st Row Right Seat Mounted Side Squib 1 – Circuit Open when the Occupant Restraint Controller (ORC) is powered. The causes of this code can range from RIGHT SEAT SQUIB 1 LINE 2 CIRCUIT OPEN to RIGHT SEAT AIRBAG malfunctions, and the solutions to each of these causes vary. Understanding the cause and potential solutions of Dodge Code B0028-13 is essential in order to ensure the safety of the vehicles occupants.
https://www.youtube.com/watch?v=zexQV4-fUhg