Dodge Code P0693

When your Dodge engine encounters a fault code P0693, it’s an indicator that the Totally Integrated Power Module (TIPM) has detected an open or shorted condition in the cooling fan 2 control circuit. This Dodge code P0693 is the result of a variety of potential causes and should be addressed as soon as possible. Below is a table outlining the causes and solutions to this issue.

Causes and Solutions to Dodge Code P0693

Cause Solution
K175 RAD FAN HIGH SPEED CONTROL CIRCUIT SHORTED TO GROUND Replace the harness and the shorted circuit.
K175 RAD FAN HIGH SPEED CONTROL CIRCUIT OPEN OR HIGH RESISTANCE Inspect the harness and clean the contacts.
RADIATOR FAN HIGH RELAY Replace the relay and test the circuit.
TOTALLY INTEGRATED POWER MODULE (TIPM) Replace the TIPM and test the circuit.

It’s important to be aware of the Dodge code P0693 when it appears in your engine, as it could be a sign of several potential problems. The code is the result of a shorted or open condition in the cooling fan 2 control circuit, which is monitored by the Totally Integrated Power Module (TIPM). An open or shorted condition in this circuit will cause the TIPM to detect the fault code and activate the Check Engine light. In order to address the issue, it’s important to identify the cause of the fault code. Common causes of this code include the K175 RAD FAN HIGH SPEED CONTROL CIRCUIT SHORTED TO GROUND, the K175 RAD FAN HIGH SPEED CONTROL CIRCUIT OPEN OR HIGH RESISTANCE, the RADIATOR FAN HIGH RELAY, and the TOTALLY INTEGRATED POWER MODULE (TIPM). Each of these causes have different solutions, which are outlined in the table below. It is important to properly diagnose the issue and take the necessary steps to address the issue as soon as possible.

Diagnosing the Cause of Dodge Code P0693

When Dodge code P0693 appears in your engine, it is important to properly diagnose the issue. If the K175 RAD FAN HIGH SPEED CONTROL CIRCUIT SHORTED TO GROUND is the cause, the solution is to replace the harness and the shorted circuit. If the K175 RAD FAN HIGH SPEED CONTROL CIRCUIT OPEN OR HIGH RESISTANCE is the cause, the solution is to inspect the harness and clean the contacts. If the RADIATOR FAN HIGH RELAY is the cause, the solution is to replace the relay and test the circuit. If the TOTALLY INTEGRATED POWER MODULE (TIPM) is the cause, the solution is to replace the TIPM and test the circuit.

Conclusion: Dodge Code P0693 and Its Causes

Dodge Code P0693 is an indicator that the Totally Integrated Power Module (TIPM) has detected an open or shorted condition in the cooling fan 2 control circuit. This code is the result of several potential causes, including the K175 RAD FAN HIGH SPEED CONTROL CIRCUIT SHORTED TO GROUND, the K175 RAD FAN HIGH SPEED CONTROL CIRCUIT OPEN OR HIGH RESISTANCE, the RADIATOR FAN HIGH RELAY, and the TOTALLY INTEGRATED POWER MODULE (TIPM). Each of these causes have different solutions, which are outlined in the table above. It is important to properly diagnose the issue and take the necessary steps to address the Dodge code P0693 as soon as possible.

https://www.youtube.com/watch?v=WO0vAWeO_90

5/5 - (79 votes)

Leave a Comment