Ford Code P2457

When it comes to diagnosing and repairing Ford vehicles, it is important to understand the meaning of the code P2457. This code stands for the Exhaust Gas Recirculation (EGR) Cooler System Performance, and it is triggered when the difference between the expected temperature of the exhaust gas and the actual exhaust gas recirculation temperature bank 1, sensor 2 (EGRT12) value is greater than a calibrated amount. This code can indicate that the vehicle is operating in derate mode and may experience a loss of power. It is important to understand the causes and solutions associated with this code in order to diagnose and repair Ford vehicles.

Causes and Solutions to Ford Code P2457

Cause Solution
Cooling system restriction Check the cooling system for any blockages.
Cooling system low coolant level Top off the coolant and inspect for leaks.
Charge air cooler (CAC) restriction Check the CAC for any blockages or leaks.
EGR cooler restriction Check the EGR cooler for blockages or leaks.
Biased EGRT12 sensor Replace the EGRT12 sensor.

Cooling System Restriction

When diagnosing Ford code P2457, the first step is to check the cooling system for any blockages. Blockages can be caused by debris in the cooling system, a faulty thermostat, or a faulty water pump. If the cooling system is blocked, the exhaust gas will not be able to reach the correct temperature and the code will be triggered.

Cooling System Low Coolant Level

The next step is to ensure that the coolant level is adequate. If the coolant level is low, the exhaust gas will not be able to reach the correct temperature and the code will be triggered. It is important to inspect the system for any leaks and if any are found, they should be repaired before topping off the coolant.

Charge Air Cooler (CAC) Restriction

The next step is to check the Charge Air Cooler (CAC) for any blockages or leaks. The CAC is responsible for cooling the air that is entering the engine, and if it is blocked or leaking, the exhaust gas will not be able to reach the correct temperature and the code will be triggered.

EGR Cooler Restriction

The next step is to check the EGR cooler for any blockages or leaks. If the EGR cooler is blocked or leaking, it will cause the exhaust gas to not reach the correct temperature and the code will be triggered.

Biased EGRT12 Sensor

Finally, if all other causes have been ruled out, the EGRT12 sensor may be biased. If the EGRT12 sensor is biased, the code will be triggered and the sensor must be replaced.

Conclusion

Ford code P2457 is a common diagnostic code that can be triggered when the exhaust gas temperature is not at the expected temperature. It is important to understand the causes and solutions associated with this code in order to diagnose and repair Ford vehicles. The most common causes are cooling system restrictions, cooling system low coolant levels, CAC restrictions, EGR cooler restrictions, and biased EGRT12 sensors. It is important to diagnose and repair these issues in order to prevent the Ford Code P2457 from being triggered.

https://www.youtube.com/watch?v=IDQmQVt2jQk

5/5 - (130 votes)

Leave a Comment