It is important to know what the Toyota Code P043F means and how it is related to the Evaporative Emission System (EVAP) in order to maintain the efficiency of the car. When the key-off EVAP monitor is in trouble, the codes P043E, P043F, P2401, P2402 and P2419 are stored in the system. This can be caused by several factors such as a clogged reference orifice, reference orifice high-flow, a leak detection pump OFF malfunction, a leak detection pump ON malfunction, or a vent valve ON (close) malfunction. In order to diagnose and repair any of these issues, it is important to understand the causes and possible solutions for the Toyota Code P043F.
Causes and Solutions for Toyota Code P043F
| Cause | Solution |
|---|---|
| Canister pump module (Reference orifice, leak detection pump, vent valve) | Replace or clean the relevant parts. |
| Connector/wire harness (Canister pump module – ECM) | Check the wires and connectors and replace if necessary. |
| EVAP system hose (pipe from air inlet port to canister pump module, canister filter, fuel tank vent hose) | Replace the hose if it is clogged or damaged. |
| ECM | Replace with a new ECM. |
Reference Orifice Clogged
The reference orifice is a hole located in the canister pump module. If the hole is clogged, the key-off EVAP monitor will not detect any leaks in the system. The solution is to replace or clean the orifice to allow air to pass through.
Reference Orifice High-Flow
The reference orifice high-flow is caused by a malfunction in the canister pump module. If the flow rate of the orifice is higher than expected, it may cause the key-off EVAP monitor to store the Toyota Code P043F. The solution is to replace the canister pump module in order to reduce the flow rate.
Leak Detection Pump OFF Malfunction
The leak detection pump is located in the canister pump module and it is responsible for detecting any leaks in the system. If the pump does not turn on when the key-off EVAP monitor is running, the Toyota Code P043F will be stored. The solution is to replace the leak detection pump in order to restore normal operation.
Leak Detection Pump ON Malfunction
The leak detection pump is responsible for detecting any leaks in the system. If the pump is not working correctly, it may cause the key-off EVAP monitor to store the Toyota Code P043F. The solution is to replace the leak detection pump in order to restore normal operation.
Vent Valve ON (Close) Malfunction
The vent valve is responsible for controlling the flow of air in the system. If the valve is stuck in the “on” or “closed” position, it may cause the key-off EVAP monitor to store the Toyota Code P043F. The solution is to replace the vent valve in order to restore normal operation.
Conclusion
Toyota Code P043F is related to the Evaporative Emission System (EVAP) and can be caused by several factors such as a clogged reference orifice, reference orifice high-flow, a leak detection pump OFF malfunction, a leak detection pump ON malfunction, or a vent valve ON (close) malfunction. In order to diagnose and repair any of these issues, it is important to understand the causes and possible solutions for the Toyota Code P043F. The most common solutions include replacing or cleaning the relevant parts, checking the wires and connectors and replacing them if necessary, and replacing the hose or pipe if it is clogged or damaged. The final solution is to replace the ECM.
https://www.youtube.com/watch?v=QVCRmbsb7aw