Having a Mazda vehicle with a code B1202 can be a stressful situation. This code is an indication of a malfunction in the fuel gauge sender unit circuit, which can lead to a great deal of frustration. The cause of code B1202 can be attributed to an open circuit in the wiring harness between the instrument cluster and the fuel gauge sender unit, a malfunction of the fuel gauge sender unit, or a malfunction of the instrument cluster. Fortunately, there are a few solutions to this issue which can help drivers get back on the road and avoid any further problems.
Causes and Solutions for Mazda Code B1202
| Cause | Solution |
|---|---|
| Open circuit in wiring harness between instrument cluster and fuel gauge sender unit | Check wiring harness and replace any damaged wires |
| Fuel gauge sender unit malfunction | Inspect the unit and replace if necessary |
| Instrument cluster malfunction | Test the cluster and repair or replace if needed |
| Resistance between instrument cluster and fuel gauge sender unit is more than 198 ohms for 60 s | Check the resistance of the two units and adjust if necessary |
Mazda code B1202 can be a daunting error message for any driver. The code indicates that there is a malfunction in the fuel gauge sender unit circuit, which can be a result of an open circuit in the wiring harness between the instrument cluster and the fuel gauge sender unit, a malfunction of the fuel gauge sender unit, or a malfunction of the instrument cluster. To fix this issue, the wiring harness must be checked and any damaged wires must be replaced. Additionally, the fuel gauge sender unit must be inspected and repaired or replaced if necessary, and the instrument cluster must be tested and repaired or replaced if needed. Lastly, the resistance between the instrument cluster and fuel gauge sender unit must be checked and adjusted if needed. By following these steps, drivers can fix the issue and get back on the road.
Conclusion
Mazda code B1202 is an indication of a malfunction in the fuel gauge sender unit circuit, which can lead to a great deal of frustration. Fortunately, there are a few solutions to this issue which can help drivers get back on the road and avoid any further problems. By checking and replacing any damaged wires in the wiring harness, inspecting and replacing the fuel gauge sender unit, testing and repairing or replacing the instrument cluster, and adjusting the resistance between the instrument cluster and fuel gauge sender unit if needed, drivers can be sure to get their Mazda Code B1202 issue fixed and get back to the road.
https://www.youtube.com/watch?v=36bMlUiuxts