FIAT Code P1128 is a diagnostic code that is used to detect when fuel control has not changed from open loop to closed loop control. This issue can be caused by a multitude of factors, ranging from a wiring issue, fuel supply line restriction, or a faulty fuel pump module. It is important to understand the causes and solutions of this issue in order to make sure your car is running safely and efficiently. Below is a table of the common causes and solutions of FIAT Code P1128.
Common Causes and Solutions of FIAT Code P1128
| Cause | Solution |
|---|---|
| O2 SENSOR 1/1 WIRING OPEN OR SHORTED | Check and replace any damaged or faulty wiring. |
| RESTRICTED FUEL SUPPLY LINE | Check fuel supply line for any blockages or restrictions. |
| FUEL PUMP INLET STRAINER PLUGGED | Replace the fuel pump inlet strainer if it is plugged. |
| FUEL FILTER/PRESSURE REGULATOR | Replace the fuel filter or pressure regulator if it is malfunctioning. |
When your FIAT vehicle displays the code P1128, it means that the engine is not achieving closed loop fuel control. This issue can be caused by a wide array of factors, such as wiring problems, fuel supply line blockages, and faulty fuel pumps. Knowing the causes and solutions of this issue can help you to diagnose and repair the problem quickly and safely. With the right knowledge and experience, you can make sure your FIAT engine is running at its best.
O2 SENSOR 1/1 WIRING OPEN OR SHORTED
When the code P1128 is displayed, it could be caused by a wiring problem. If the O2 sensor 1/1 wiring is open or shorted, it could prevent the engine from achieving closed loop control. To solve this issue, you should check and replace any wiring that is damaged or faulty.
RESTRICTED FUEL SUPPLY LINE
Another common cause of FIAT Code P1128 is a restricted fuel supply line. This can prevent fuel from being supplied to the engine, resulting in an open loop control. To fix this issue, you should check the fuel supply line for any blockages or restrictions.
FUEL PUMP INLET STRAINER PLUGGED
The fuel pump inlet strainer can become plugged, leading to the code P1128. If the strainer is plugged, it might be necessary to replace it. This will ensure that the fuel pump is properly supplying fuel to the engine.
FUEL FILTER/PRESSURE REGULATOR
The fuel filter or pressure regulator can malfunction, leading to the code P1128. If the fuel filter or pressure regulator is not working correctly, it should be replaced. This will help to ensure that the engine is getting the correct amount of fuel.
Conclusion
FIAT Code P1128 can be caused by a variety of issues, such as wiring problems, fuel supply line blockages, and faulty fuel pumps. It is important to understand the causes and solutions of this issue in order to make sure your car is running safely and efficiently. With the right knowledge and experience, you can diagnose and fix FIAT Code P1128 quickly and easily.
https://www.youtube.com/watch?v=QsDXM1sarmk