The FIAT Code C0051-54 indicates a potential problem with the steering wheel position sensor that has caused a missing calibration. This code is triggered when the steering angle neutral position is not detected by the ABS (Anti Lock Brake) control unit or the EPS (Electric Power Steering) control unit. Common reasons for this code to be triggered are sudden vehicle acceleration while turning right or left, the vehicle is on a flyover, or the car is steering repeatedly left or right.
🎯Suggested article: FIAT Code B106D-86
Causes and Solutions for FIAT Code C0051-54
| Cause | Solution |
|---|---|
| EPS Control Unit Fault | Replace the EPS Control Unit |
| ABS Control Unit Fault | Replace the ABS Control Unit |
| Change in Vehicle Speed | Adjust the speed of the vehicle |
| Steering Wheel Movement | Check the steering wheel for any damage |
The FIAT Code C0051-54 is a common issue that affects the steering wheel position sensor, resulting in a missing calibration. When this code is triggered, the ABS (Anti Lock Brake) control unit and the EPS (Electric Power Steering) control unit cannot detect the steering angle neutral position based on the signals detected from each sensor and the single control units. The causes of this code include faulty EPS and ABS control units, sudden changes in vehicle speed, and steering wheel damage. To resolve the issue, the EPS control unit or the ABS control unit must be replaced, the vehicle’s speed should be adjusted, and the steering wheel should be checked for damage.
Faulty EPS Control Unit
When the EPS control unit is faulty, it will be unable to detect the steering angle’s neutral position, resulting in the FIAT code C0051-54. This can be resolved by replacing the EPS control unit with a new one.
Faulty ABS Control Unit
The ABS control unit detects the steering angle’s neutral position. If it is faulty, it will trigger the FIAT code C0051-54. Therefore, the ABS control unit must be replaced to resolve the issue.
👀Look at this: FIAT Code P1CEA
Change in Vehicle Speed
The FIAT code C0051-54 can also be triggered when the speed of the vehicle changes suddenly. To fix this issue, the driver must adjust the vehicle’s speed to ensure the code is not activated.
Steering Wheel Movement
The steering wheel can become damaged if it is moved too forcefully. This can result in the FIAT code C0051-54 being triggered. To resolve this issue, the steering wheel should be checked for damage and replaced if necessary.
Conclusion
The FIAT Code C0051-54 is a common issue that affects the steering wheel position sensor, resulting in a missing calibration. The causes of this code include faulty EPS and ABS control units, sudden changes in vehicle speed, and steering wheel damage. To resolve the issue, the EPS control unit or the ABS control unit must be replaced, the vehicle’s speed should be adjusted, and the steering wheel should be checked for damage. Following these steps, the FIAT Code C0051-54 can be successfully resolved, and the steering wheel position sensor will be calibrated correctly.
👀Look at this: FIAT Code P1037