The Chevrolet Code B1000 35 is a diagnostic trouble code (DTC) that indicates an internal malfunction in the Electronic Control Unit (ECU). This particular code is associated with the signal high time exceeding the maximum level, also known as Signal High Time > Maximum. The ECU goes through a power up process, relying on voltage and ground to detect internal faults. If the voltage is outside the valid operating range, the module will still run the program. There are several potential causes and failure types associated with this code.
Causes and Solutions of Chevrolet Code B1000 35
| Cause | Solution |
|---|---|
| Voltage outside of valid operating range | Check for electrical issues and replace any faulty parts |
| Excessive load on the circuit | Check wiring and replace any damaged wires |
| Incorrect air pressure in the tires | Check the tire pressure and adjust accordingly |
| Faulty or damaged ECU | Replace the ECU with a new one |
Voltage Outside of Valid Operating Range
When the voltage is outside of the valid operating range, the ECU will still run the program. An electrical issue such as wiring damage, incorrect air pressure in the tires, or a faulty alternator can cause this code to appear. To fix this issue, check the wiring and replace any damaged wires, make sure the tire pressure is correct, and check the alternator for any problems. If all of these checks are clear, then the ECU may need to be replaced.
Excessive Load on the Circuit
When there is an excessive load on the circuit, the Chevrolet Code B1000 35 will be triggered. This can be caused by faulty wiring or connections, or an issue with the ECU. To fix this issue, check the wiring and connections and replace any damaged wires. If all of these checks are clear, then the ECU may need to be replaced.
Incorrect Air Pressure in the Tires
If the air pressure in the tires is incorrect, the Chevrolet Code B1000 35 can be triggered. To fix this issue, check the tire pressure and adjust accordingly. If the tire pressure is correct, then the ECU may need to be replaced.
Faulty or Damaged ECU
If all of the other causes have been ruled out and the Chevrolet Code B1000 35 is still present, then the ECU may be faulty or damaged and need to be replaced.
Conclusion
The Chevrolet Code B1000 35 is a diagnostic trouble code (DTC) that indicates an internal malfunction in the Electronic Control Unit (ECU). In order to diagnose and fix this issue, it is important to check for electrical issues, excessive load on the circuit, incorrect air pressure in the tires, and a faulty or damaged Chevrolet Code B1000 35 ECU. With the right diagnosis and repair, the issue can be resolved and the vehicle can be back on the road in no time.
https://www.youtube.com/watch?v=fipG78cGXpo