When dealing with a Cadillac Code P0442, it is important to understand the meaning of the code, the causes, and the solutions. The code, which stands for Evaporative Emission (EVAP) System Small Leak Detected, is a diagnostic trouble code (DTC) that may be stored when the engine runs tests to ensure the evaporative emission control system (EVAP) is working properly. If a leak is detected, the code is set and the Malfunction Indicator Lamp (MIL) is illuminated. The code is set when the control module detects a leak in the EVAP system that is greater than a calibrated amount. To understand the cause and solutions of the P0442 code, it is important to understand the parameters that must be met before the code is set, such as an ignition 1 voltage between 10-16 volts, the barometric pressure (BARO) is greater than 74 kPa, and the fuel level is between 15-85 percent. With the right knowledge and understanding of the issue, the code can be identified and resolved quickly.
Causes and Solutions for Cadillac Code P0442
| Causes | Solutions |
|——–|———–|
| Control module detects a leak in the EVAP system that is greater than a calibrated amount. | Check for any broken or disconnected hoses, or any other leaks in the EVAP system. |
| The control module must complete several EONV tests before the diagnostic can turn the MIL ON or OFF. | Check for any fault codes and use a scan tool to view the parameters of the EVAP system. |
| The ignition 1 voltage is between 10-16 volts. | Repair any wiring issues and replace any faulty sensors or components. |
| The barometric pressure (BARO) is greater than 74 kPa. | Replace any faulty parts that may have caused the leak. |
| No fuel filling during the EONV test period. | Perform a smoke test or use a vacuum test to check for any leaks. |
| The fuel level is between 15-85 percent. | Perform necessary repairs and reset the code. |
Ignition 1 Voltage
The ignition 1 voltage is an important parameter when diagnosing a Cadillac Code P0442. The ignition 1 voltage should be between 10-16 volts for the control module to complete the EONV tests. If the voltage is out of range, the code may be set and the Malfunction Indicator Lamp (MIL) may be illuminated. It is important to check the wiring and repair any issues before attempting to diagnose the code further.
Barometric Pressure
Another important parameter to consider when dealing with a Cadillac Code P0442 is the barometric pressure (BARO). The BARO should be greater than 74 kPa for the control module to complete the EONV tests. If the BARO is out of range, the code may be set and the MIL may be illuminated. It is important to check the sensors and replace any faulty components before attempting to diagnose the code further.
Fuel Level
The fuel level is another important parameter to consider when diagnosing a Cadillac Code P0442. The fuel level should be between 15-85 percent for the control module to complete the EONV tests. If the fuel level is out of range, the code may be set and the MIL may be illuminated. It is important to check the fuel level and perform any necessary repairs before attempting to diagnose the code further.
Leaks
When dealing with a Cadillac Code P0442, it is important to check for any broken or disconnected hoses, or any other leaks in the EVAP system. If a leak is detected, the code is set and the MIL is illuminated. It is important to check for any fault codes and use a scan tool to view the parameters of the EVAP system. Additionally, it is also important to perform a smoke test or use a vacuum test to check for any leaks.
Conclusion
When diagnosing a Cadillac Code P0442, it is important to understand the meaning of the code, the causes, and the solutions. The code is set when the control module detects a leak in the EVAP system that is greater than a calibrated amount. To understand the cause and solutions of the P0442 code, it is important to consider several parameters, such as the ignition 1 voltage, the barometric pressure (BARO), and the fuel level. Additionally, it is also important to check for any broken or disconnected hoses, or any other leaks in the EVAP system. With the right knowledge and understanding of the issue, the Cadillac Code P0442 can be identified and resolved quickly.
https://www.youtube.com/watch?v=u3pfH-slq1Q