When it comes to diagnosing and repairing Dodge vehicles, the code P012B is one of the most common codes encountered. This code indicates an issue with the Turbocharger/Supercharger Inlet Pressure Sensor 1 Circuit Performance. This code is often associated with a 5-Volt Supply Circuit Open, excessive resistance in the Supercharger Inlet Map Signal Circuit, excessive resistance in the Sensor Ground Circuit, Supercharger Inlet Map Sensor, and/or Powertrain Control Module. In order to determine the exact cause of the issue, it is important to understand the various components associated with the code, including the Mass Air Flow (MAF) Sensor, the Supercharger Outlet MAP Sensor, and the Bank 1 and Bank 2 MAP Sensors.
Causes and Solutions for Dodge Code P012B
| Cause | Solution |
|---|---|
| 5-Volt Supply Circuit Open | Check the resistance of the circuit and replace the circuit if necessary. |
| Excessive Resistance in the Supercharger Inlet Map Signal Circuit | Check the resistance of the circuit and replace if necessary. |
| Excessive Resistance in the Sensor Ground Circuit | Check the resistance of the circuit and replace if necessary. |
| Supercharger Inlet Map Sensor | Replace the sensor as necessary. |
| Powertrain Control Module | Replace the module as necessary. |
5-Volt Supply Circuit Open
When diagnosing Dodge Code P012B, it is important to check the 5-Volt Supply Circuit Open for any issues. This circuit provides power to the Supercharger Inlet Map Sensor, and if the circuit is open, it will cause an interruption in the signal and result in the code being triggered. To check the circuit, use a digital multimeter to measure the resistance of the circuit. If the resistance is too high, it is likely that the 5-Volt Supply Circuit Open will need to be replaced.
Excessive Resistance in the Supercharger Inlet Map Signal Circuit
In order to diagnose the Excessive Resistance in the Supercharger Inlet Map Signal Circuit, it is necessary to measure the resistance of the circuit. If the circuit has an excessive resistance, it is likely that the circuit will need to be replaced.
Excessive Resistance in the Sensor Ground Circuit
The Excessive Resistance in the Sensor Ground Circuit can be determined by measuring the resistance of the circuit. If the circuit has an excessive resistance, it is likely that the circuit will need to be replaced.
Supercharger Inlet Map Sensor
In order to diagnose the Supercharger Inlet Map Sensor, it is necessary to measure the resistance of the sensor. If the sensor is not functioning properly, it is likely that the sensor will need to be replaced.
Powertrain Control Module
If the Powertrain Control Module is not functioning properly, it can cause the code to be triggered. It is important to replace the module as necessary to ensure that the code is not triggered again.
Conclusion
When it comes to diagnosing and repairing Dodge vehicles, the code P012B can be a confusing and difficult issue to address. By understanding the various components associated with the code, including the 5-Volt Supply Circuit Open, the Supercharger Inlet Map Signal Circuit, the Sensor Ground Circuit, the Supercharger Inlet Map Sensor, and the Powertrain Control Module, it is possible to determine the exact cause of the issue and take the necessary steps to repair the vehicle. To ensure that the issue is resolved, it is important to follow the solutions outlined above for Dodge Code P012B.
https://www.youtube.com/watch?v=86gHTpFZBvM