The Dodge Code P0038 is a Powertrain Control Module (PCM) code associated with the O2-SENSOR 1/2 HEATER CIRCUIT HIGH. This code is related to the Positive Temperature Coefficient (PTC) element inside the O2 Sensor to attain the fastest possible temperature rise and to control the steady-state temperature of the O2 Sensor. The Powertrain Control Module
Dodge Code P1723 is a diagnostic trouble code associated with a Dodge vehicle’s transmission system. This code is triggered when the transmission control module (TCM) attempts to control the torque converter clutch (TCC) on or off status but cannot do so for 200 milliseconds. This could be caused by various issues, such as a short
Dodge Code U1110 is an error code associated with the loss of vehicle speed message. This code is generated when the Electronic Pedestrian Protection Module (EPPM) can’t receive the vehicle speed signal from the Anti-lock Brake Module (ABS), Electronic Stability Program (ESP), and Electronic Stability Control (ESC) over the CAN C bus. This situation can
Having a Dodge vehicle with the code B25AB can cause concern. This code usually indicates that the Liftgate Unlock Control Circuit is Low. This can be caused by various issues, from the Liftgate Unlock Relay Control Circuit being open to a malfunctioning Liftgate Unlock Relay or a problem with the Totally Integrated Power Module (TIPM).
Regarding automotive diagnostics, the Dodge Code P1621 can be a real headache. This code is related to the oxygen sensor return circuit voltage, and it can cause many issues if it is not addressed properly. The code is triggered when the oxygen sensor’s return circuit voltage is less than 0.96 volts for more than 9.0
The Dodge Code U0001 is a CAN C Bus that detects an open, short to ground, or short to voltage on the CAN C Bus circuit. This code is set when the controller detects this issue and can be caused by several problems related to the battery voltage, ignition, VIN messages, TIPM, or integrated power
When dealing with the Dodge Code P2503, the Electronic Voltage Regulation (EVR) system maintains the system voltage at a desired level by turning the Pulse Width Modulated (PWM) Alternator Field Control circuit on and off. This code can often be caused by several things, such as a loose or broken accessory drive belt or defective
Regarding the Dodge Code P1618, it is important to understand that it relates to the Sensor Reference Voltage 1 Erratic. The Powertrain Control Module (PCM) contains two internal 5-Volt Sensor Supply sources, and the PCM will turn off the 5-Volt Supply circuit if the 5-Volt Supply circuit is shorted to ground or if one of
Modern vehicles are more sophisticated than ever and require more attention and maintenance than their predecessors. One such issue that drivers may experience is Dodge Code P2706. This code is related to a transmission control circuit malfunction and can be difficult to diagnose and repair. To better understand the causes and solutions for Dodge Code
Dodge Code P062F is an Internal Control Module EEPROM Error that occurs when the Electronic Erasable Programmable Read Only Memory (EEPROM) data has been corrupted or access is impossible. This code is detected by the Flash Control Unit (FCU) Application-Specific Integrated Circuit (ASIC) when a hardware failure is set and is determined by calculating a
Regarding Dodge vehicles, the code P3401 can be a source of major headaches. This code is associated with a cylinder deactivation control circuit and can lead to various issues. This code can cause problems with the engine’s performance and may even lead to a complete breakdown of the vehicle. Therefore, it is important to understand