When it comes to Ford vehicles, it is important to be aware of diagnostic trouble codes like P059F. This code is associated with the grille shutter actuator and can indicate a range of issues from a performance issue to the grille shutter being stuck. This code is triggered when the grille shutter actuator senses it is unable to move the grille shutter and sends a message to the PCM. If the fault is communicated for a predetermined amount of time, then the PCM sets the DTC. In this article, we will take a closer look at the causes and solutions of Ford Code P059F.
Causes and Solutions of Ford Code P059F
| Cause | Solution |
|---|---|
| The grille shutter actuator is unable to move the grille shutter. | Replace the faulty grille shutter actuator. |
| The PCM is not receiving the correct signal from the LIN. | Check the LIN for any damaged or disconnected wires. |
| The grille shutter is stuck. | Check the grille shutter for any blockages or debris. |
| The DTC runs continuously. | Look for any related service bulletins such as SSM46857. |
When it comes to Ford vehicles, it is important to be aware of the warning signs that could indicate a problem such as Ford Code P059F. This code is associated with the grille shutter actuator and can be caused by a range of issues such as a performance issue, the grille shutter being stuck, or the PCM not receiving the correct signal from the LIN. In order to find the source of the problem and resolve it, it is important to have an understanding of the causes and solutions of Ford Code P059F. In this article, we will take a detailed look at the causes and solutions of this code, so that you can identify and fix the issue with confidence.
The Grille Shutter Actuator
If the cause of the issue is the grille shutter actuator, then it is likely that the grille shutter is stuck or unable to move. In this situation, the best solution is to replace the faulty grille shutter actuator. This is a relatively easy process, and can be completed within a few minutes.
The PCM Not Receiving the Correct Signal
Another possible cause of Ford Code P059F is the PCM not receiving the correct signal from the LIN. In this case, the best solution is to check the LIN for any damaged or disconnected wires. If any are found, they should be replaced or reconnected. This should help to resolve the issue and get the Ford back to running smoothly.
The Grille Shutter is Stuck
If the grille shutter is stuck, then it is important to check it for any blockages or debris. This can easily be done by using a flashlight or by using a small mirror to inspect the grille. If any blockages or debris are found, they should be removed and the issue should be resolved.
DTC Runs Continuously
In some cases, the DTC may run continuously and the issue may not be resolved. In this situation, it is important to look for any related service bulletins such as SSM46857. This bulletin can provide useful information on the root cause of the issue and the best way to resolve it.
Conclusion
Ford Code P059F is an important diagnostic code to be aware of if you own a Ford vehicle. This code can indicate a range of issues, such as the grille shutter being stuck, the PCM not receiving the correct signal from the LIN, or the DTC running continuously. By understanding the causes and solutions of Ford Code P059F, you can identify and fix the issue quickly, and get your Ford running smoothly again.
https://www.youtube.com/watch?v=-p8cXvpAzBE