Ford Code P06E9 is a diagnostic trouble code (DTC) that indicates there is a problem with the engine starter performance. This code can be triggered when the Powertrain Control Module (PCM) recognizes no engine rotation during a crank event. The DTC is most commonly associated with a faulty starter motor, low battery charge, or a problem with the ignition switch. To resolve this issue, the PCM needs to be inspected and reset. Additionally, the battery should be checked to make sure it is charged correctly, and the starter motor and ignition switch should be thoroughly inspected and tested. To help diagnose the issue, there are several service bulletins related to Ford Code P06E9, such as SSM49363, SSM50116, SSM50174 and SSM50245.
Causes and Solutions for Ford Code P06E9
| Cause | Solution |
|---|---|
| Faulty starter motor | Inspect and reset PCM |
| Low battery charge | Check battery charge |
| Problem with ignition switch | Inspect and test starter motor and ignition switch |
| Related service bulletins | SSM49363, SSM50116, SSM50174, SSM50245 |
Ford Code P06E9 is an error code that signals a problem with engine starter performance. This code is triggered when the Powertrain Control Module (PCM) does not detect any engine rotation during a crank event. The root of the issue could be a faulty starter motor, low battery charge, or an issue with the ignition switch. To fix this problem, the PCM needs to be inspected and reset, and the battery should be checked for proper charge. Additionally, the starter motor and ignition switch must be inspected and tested. To help with the diagnosis, there are four related service bulletins available, such as SSM49363, SSM50116, SSM50174 and SSM50245.
Inspect and Reset the PCM
The PCM must be inspected and reset if Ford Code P06E9 is triggered. The PCM is a computer which monitors the performance of the engine and transmits data back to the vehicle’s computer. If the PCM detects no engine rotation during a crank event, it will trigger this code. To reset the PCM, the battery must be disconnected from the vehicle for at least 30 seconds. After 30 seconds, the battery must be reconnected, and the engine should be restarted. If the code remains, the PCM must be inspected for any potential issues.
Check the Battery Charge
If the Ford Code P06E9 is triggered, it could indicate that the battery is not charged properly. To check the battery charge, the vehicle must be tested with a digital voltmeter. If the voltage output is not within the correct range, the battery must be recharged or replaced. Additionally, the battery cables should be inspected for any corrosion or damage.
Inspection and Testing of Starter Motor and Ignition Switch
The starter motor and ignition switch should be inspected and tested if Ford Code P06E9 is triggered. The starter motor should be tested for proper operation, and the ignition switch should be inspected for any mechanical issues. If there are any problems with either of these components, they must be replaced or repaired.
There are four related service bulletins available for Ford Code P06E9, such as SSM49363, SSM50116, SSM50174 and SSM50245. These bulletins provide detailed information about the cause and solution of the code. Technicians should refer to them while diagnosing the issue.
Conclusion: How to Resolve Ford Code P06E9
The Ford Code P06E9 is a diagnostic trouble code (DTC) that indicates there is a problem with the engine starter performance. To resolve this issue, the PCM needs to be inspected and reset, the battery should be checked for proper charge, and the starter motor and ignition switch should be inspected and tested. Additionally, technicians can use four related service bulletins, such as SSM49363, SSM50116, SSM50174 and SSM50245, to help diagnose the issue and find the best solution. If the code is not resolved, professional assistance from an experienced mechanic may be required to properly diagnose and repair the Ford Code P06E9 problem.
https://www.youtube.com/watch?v=wNngLs_S5qg