Have you ever heard of the Ford Code P160A? It’s a dreaded Control Module Vehicle Options Reconfiguration Error that can set when the Powertrain Control Module (PCM) detects a vehicle option configuration concern. The causes of this error vary, from aftermarket performance products to PCM programming errors, PCM internal software errors, and even damaged PCM. It can be quite a challenge to diagnose and fix this issue but there are some solutions that can help.
Causes and Solutions for Ford Code P160A
| Cause | Solution |
|---|---|
| Aftermarket performance products | Check for any aftermarket performance products and remove if needed |
| PCM programming error | Reprogram or update the calibration |
| PCM internal software error | Perform RELEARN VEHICLE DATA procedure from the SERVICE FUNCTIONS menu on the scan tool |
| Damaged PCM | Replace the PCM if necessary |
Aftermarket Performance Products
Ford Code P160A can be caused by aftermarket performance products. These products can often cause a conflict with the vehicle’s software. In order to diagnose and fix this issue, the first step is to check for any aftermarket performance products and remove them if needed. This will help to reduce the risk of the error code reoccurring.
PCM Programming Error
If the Ford Code P160A is caused by a PCM programming error, it may be necessary to reprogram or update the calibration. This can be done with a scan tool, and the process will depend on the specific vehicle. It is important to make sure that the correct calibration is used for the specific vehicle.
PCM Internal Software Error
If the Ford Code P160A is caused by a PCM internal software error, it may be necessary to perform the RELEARN VEHICLE DATA procedure from the SERVICE FUNCTIONS menu on the scan tool. This process will reset the PCM and allow the vehicle to run correctly.
Damaged PCM
If the Ford Code P160A is caused by a damaged PCM, it may be necessary to replace the PCM. This is a more involved process, as the PCM will need to be removed and replaced. It is important to make sure that the correct PCM is used for the specific vehicle.
Conclusion
The Ford Code P160A is a dreaded Control Module Vehicle Options Reconfiguration Error. It can be caused by many different issues, from aftermarket performance products to PCM programming errors, PCM internal software errors, and even damaged PCM. Diagnosing and fixing this issue can be quite challenging, but the solutions outlined above can help. If you are experiencing Ford Code P160A, make sure to check for any aftermarket performance products, reprogram or update the calibration, perform the RELEARN VEHICLE DATA procedure from the SERVICE FUNCTIONS menu on the scan tool, or replace the PCM if necessary.
https://www.youtube.com/watch?v=VaEgINwj-68