Hyundai Code P0197 is an engine oil temperature sensor low input that could lead to poor performance and damage to the engine. This code is triggered when the signal voltage is lower than the possible range of a properly operating OTS. To determine the cause of this issue, you must conduct voltage range checks, and the engine coolant temperature must be less than 212 degrees F and the oil temperature must be above 309 degrees F. The possible causes of this problem are a short circuit to ground, contact resistance in connectors, and a faulty OTS. In this article, we will explore the causes and solutions to Hyundai Code P0197.
Causes and Solutions of Hyundai Code P0197
| Cause | Solution |
|---|---|
| Short circuit to ground | Check the wiring harness for any signs of damage and replace the faulty part. |
| Contact resistance in connectors | Inspect the connector for any signs of corrosion or wear and tear and use a multi-meter to check for any loose connection. |
| Faulty OTS | Replace the OTS with the correct part or use a compatible replacement. |
| Incorrect voltage range | Check the voltage range of the OTS and ensure it is within the manufacturer’s recommended range. |
Short Circuit to Ground
A short circuit to ground is one of the most common causes of Hyundai Code P0197. It can occur due to a damaged wiring harness or a faulty part, such as an oil temperature sensor. To diagnose this problem, you should check the wiring harness for any signs of damage and replace the faulty part.
Contact Resistance in Connectors
Contact resistance in connectors can also be a cause of Hyundai Code P0197. This is caused by corrosion or wear and tear in the connector. To diagnose this issue, you should inspect the connector for any signs of corrosion or wear and tear and use a multi-meter to check for any loose connection.
Faulty OTS
A faulty oil temperature sensor can also lead to Hyundai Code P0197. In this case, you should replace the OTS with the correct part or use a compatible replacement.
Incorrect Voltage Range
If the voltage range of the OTS is out of the manufacturer’s recommended range, it can also lead to Hyundai Code P0197. To diagnose this issue, you should check the voltage range of the OTS and ensure it is within the manufacturer’s recommended range.
Conclusion
Hyundai Code P0197 is a common problem that can cause your engine to run poorly and can lead to damage. In this article, we have explored the four most common causes of this issue, along with their solutions. The causes include a short circuit to ground, contact resistance in connectors, a faulty OTS, and incorrect voltage range. To ensure the proper functioning of your engine and avoid further damage, it is important to diagnose and fix Hyundai Code P0197 as soon as possible.
https://www.youtube.com/watch?v=dfsMjgHFn4E