When it comes to Mazda cars, one of the most common codes that may appear is the Mazda code C1096. This code relates to the pump motor, motor relay system, and when the pump motor monitor voltage continues for 0.05 seconds more than 0.75V, then this code is triggered. This code can be caused by many different issues, ranging from the ABS 50A fuse malfunction to the open or short to ground circuit in the wiring harness between the battery and the DSC/RSC HU/CM terminal AK. It is important to be able to understand the causes of this code and to identify the best solutions for each of these causes in order to ensure the highest quality of care for your Mazda car.
Causes and Solutions of Mazda Code C1096
| Cause | Solution |
| ABS 50A fuse malfunction | Replace the fuse |
| Open or short to ground circuit in the wiring harness between the battery and the DSC/RSC HU/CM terminal AK | Check the wiring harness and replace any damaged parts |
| Open circuit in the wiring harness between the DSC/RSC HU/CM terminal B and the body ground | Inspect and repair any wiring issues |
| Open or short circuit in the DSC/RSC HU/CM internal motor relay, or stuck motor relay | Replace damaged parts or reset the motor relay |
ABS 50A Fuse Malfunction
When the ABS 50A fuse malfunctions, it is important to replace the fuse to ensure that the Mazda code C1096 is not triggered. If the fuse is not replaced, then the pump motor monitor voltage will continue for 0.05 seconds more than 0.75V, causing the code to be triggered.
Open or Short to Ground Circuit in the Wiring Harness
If there is an open or short to ground circuit in the wiring harness between the battery and the DSC/RSC HU/CM terminal AK, it is important to check the wiring harness and replace any damaged parts. If the wiring harness is not repaired, the Mazda code C1096 will continue to be triggered.
Open Circuit in the Wiring Harness Between the DSC/RSC HU/CM Terminal B and the Body Ground
If there is an open circuit in the wiring harness between the DSC/RSC HU/CM terminal B and the body ground, then it is important to inspect and repair any wiring issues. If the wiring is not repaired, the Mazda code C1096 will continue to be triggered.
Open or Short Circuit in the DSC/RSC HU/CM Internal Motor Relay, or Stuck Motor Relay
If there is an open or short circuit in the DSC/RSC HU/CM internal motor relay, or the motor relay is stuck, then it is important to replace any damaged parts or reset the motor relay. If the motor relay is not repaired, the Mazda code C1096 will continue to be triggered.
Conclusion: Solving Mazda Code C1096
Mazda code C1096 can be caused by several different issues, ranging from an ABS 50A fuse malfunction to an open or short to ground circuit in the wiring harness. It is important to be aware of the different causes of this code and to identify the best solutions for each of these causes in order to ensure the highest quality of care for your Mazda car. The most important step in solving Mazda code C1096 is to diagnose the issue and take appropriate action to repair it.
https://www.youtube.com/watch?v=XVo1jTwifYY