If your Mazda vehicle is displaying the code P0402, it means that the EGR system is experiencing excessive flow at idle speed. This code has a few potential causes and can have a major impact on the performance of the vehicle, such as increased emissions, reduced fuel economy, and poor idle quality. Fortunately, there are a few potential solutions that can help you to diagnose and fix the issue, ensuring your Mazda vehicle is running smoothly and efficiently. Mazda Code P0402 is a serious issue that needs to be addressed in order to get your vehicle functioning properly again.
Causes and Solutions for Mazda Code P0402
| Cause | Solution |
|---|---|
| EGR VR solenoid circuit open, shorted to ground or to power | Check the wiring and connectors for any faults, replace the solenoid if necessary. |
| EGR VR solenoid power circuit is open to the Main Relay | Inspect the main relay and wiring, and make repairs if needed. |
| EGR VR solenoid is damaged or has failed | Replace the solenoid as needed. |
| DPFE sensor signal circuit is open or shorted to ground | Inspect the wiring and connectors, and make repairs if needed. |
EGR VR Solenoid Circuit
The EGR VR solenoid circuit is responsible for controlling the flow of exhaust gas from the EGR system. If this circuit is open, shorted to ground, or shorted to power, it can cause the Mazda Code P0402 to be set. In order to diagnose this issue, you will need to check the wiring and connectors for any faults, and if necessary, replace the solenoid.
EGR VR Solenoid Power Circuit
The EGR VR solenoid power circuit is responsible for supplying the power needed to operate the solenoid. If this circuit is open to the main relay, it can cause the Mazda Code P0402. To diagnose this issue, inspect the main relay and wiring, and make repairs if needed.
EGR VR Solenoid
The EGR VR solenoid is responsible for controlling the flow of exhaust gas from the EGR system. If this solenoid is damaged or has failed, it can cause the Mazda Code P0402. In this case, the solenoid will need to be replaced.
DPFE Sensor Signal Circuit
The DPFE sensor signal circuit is responsible for providing the signal from the EGR system to the ECU. If this circuit is open or shorted to ground, it can cause the Mazda Code P0402. To diagnose this issue, inspect the wiring and connectors, and make repairs if needed.
Conclusion
Mazda Code P0402 is an issue that can have a major impact on the performance of your vehicle. Fortunately, there are a few potential solutions that can help you to diagnose and fix the issue, ensuring your Mazda vehicle is running smoothly and efficiently. It is important to properly diagnose and repair the issue in order to avoid further damage to your vehicle. Mazda Code P0402 is not something that should be ignored, and should be addressed as soon as possible to ensure your vehicle is functioning properly.
https://www.youtube.com/watch?v=57B5b9uANus