When your Subaru starts exhibiting signs of poor acceleration and idling, it could mean that it has encountered the code P2127. This code is indicative of an issue with the Throttle/Pedal Position Sensor “E” Circuit Low Input, and means that the wiring harness between the ECM and chassis ground, ECM and the accelerator pedal position sensor, the accelerator pedal assembly, or the ECM itself may be to blame. Understanding the causes of this Subaru code can help you establish a plan of action to fix the issue and get your car running smoothly again.
Causes and Solutions for Subaru Code P2127
| Cause | Solution |
|---|---|
| Wiring harness between ECM and chassis ground needs repair | Replace the wiring harness or inspect for any loose connections |
| Wiring harness between the ECM and accelerator pedal position sensor needs repair | Replace the wiring harness or check for any loose connections |
| Defective accelerator pedal assembly | Replace the accelerator pedal assembly |
| Defective ECM | Replace the ECM |
When your Subaru begins to show signs of erratic idling and acceleration, it could be a sign that it has encountered the code P2127. This code is a sign of an issue with the Throttle/Pedal Position Sensor “E” Circuit Low Input, which could be caused by an issue with the wiring harness between the ECM and chassis ground, the wiring harness between the ECM and accelerator pedal position sensor, a defective accelerator pedal assembly, or a defective ECM. Knowing the potential causes of the Subaru code P2127 can help you develop a plan of action to get your car running smoothly again.
Issues with the Wiring Harness
When it comes to the wiring harness, there are two main locations that could be at fault for the P2127 code. The first is the wiring harness between the ECM and the chassis ground. This can be fixed by either replacing the wiring harness or inspecting for any loose connections. The second is the wiring harness between the ECM and accelerator pedal position sensor. This can be fixed by either replacing the wiring harness or checking for any loose connections.
Defective Accelerator Pedal Assembly
Another potential cause of the P2127 code is a defective accelerator pedal assembly. If this is the case, then the only solution is to replace the accelerator pedal assembly.
Defective ECM
The last potential cause of the P2127 code is a defective ECM. If this is the issue, then the only solution is to replace the ECM.
Conclusion
In conclusion, when your Subaru begins to show signs of erratic idling and acceleration, it could be a sign that it has encountered the Subaru code P2127. This code is a sign of an issue with the Throttle/Pedal Position Sensor “E” Circuit Low Input, which could be caused by an issue with the wiring harness between the ECM and chassis ground, the wiring harness between the ECM and accelerator pedal position sensor, a defective accelerator pedal assembly, or a defective ECM. Knowing the potential causes of the Subaru code P2127 can help you develop a plan of action to get your car running smoothly again.
https://www.youtube.com/watch?v=BQAO-CURHaE