Toyota’s Code B1821/55 is an error code indicating various issues, including an open in Side Squib RH Circuit. When the center airbag sensor receives an open circuit signal in the side squib RH circuit for two seconds, it can cause this code to appear. This can be due to various causes, such as the No. 2 floor wire, the front seat airbag assembly RH (Side squib RH), and the center airbag sensor assembly. This code can also indicate that the control module must enter (program) the sub-system option content or the vehicle option content, known as a “not configured” failure type. To properly diagnose and fix any issues that may arise with this code, it is essential to understand the causes and possible solutions.
🚨You may be interested in: Toyota Code P0776
Causes and Solutions for Toyota Code B1821/55
| Cause | Solution |
|---|---|
| No. 2 Floor Wire | Check the wiring for damage and replace it if necessary. |
| Front Seat Airbag Assembly RH (Side Squib RH) | Replace the Front Seat Airbag Assembly RH. |
| Center Airbag Sensor Assembly | Replace the Center Airbag Sensor Assembly. |
| Not Configured | Enter the subsystem option content or the vehicle option content. |
No. 2 Floor Wire
When a No. 2 floor wire is the cause of the Toyota Code B1821/55, it is essential to check the wiring for any damage and replace it if necessary. The wiring could be damaged due to age or corrosion and become an open circuit, which can cause this code to appear.
💥See also: Toyota Code P0A7A-122
Front Seat Airbag Assembly RH (Side Squib RH)
The Front Seat Airbag Assembly RH (Side Squib RH) could also be a cause of the Toyota Code B1821/55. If this is the case, the only solution is to replace the assembly. This is an integral part of the airbag system, as it is responsible for deploying it in an accident.
Center Airbag Sensor Assembly
The Center Airbag Sensor Assembly is another possible cause of the Toyota Code B1821/55. If this is the cause, the only solution is to replace the assembly. The Center Airbag Sensor Assembly is responsible for detecting the force of an impact and then relaying the information to the airbag system.
Not Configured
The “Not Configured” failure type can also trigger the Toyota Code B1821/55. If this is the case, the only solution is to enter the sub-system or vehicle option content. This is necessary to ensure the airbag system is appropriately configured and works correctly.
Conclusion – The Necessary Steps to Solve Toyota Code B1821/55
When dealing with Toyota Code B1821/55, it is essential to understand the possible causes and solutions. The No. 2 floor wire can be checked for damage and replaced. The Front Seat Airbag Assembly RH (Side Squib RH) and the Center Airbag Sensor Assembly need to be replaced if they are causing the code to appear. If the issue is the “Not Configured” failure type, the sub-system or vehicle option content needs to be entered. It is possible to solve Toyota Code B1821/55 with the proper steps and get the airbag system working correctly.