The Toyota Code P0354 is an important diagnostic code used to identify a problem within the ignition system. This code indicates an issue with the Ignition Coil “D” Primary / Secondary Circuit and that the Electronic Control Module (ECM) is not receiving the IGF signal while the engine is running. It is important to understand the potential causes and solutions of the Toyota Code P0354 to fix this issue.
🚀Recommended article: Toyota Code P0025
Causes and Solutions for Toyota Code P0354
| Cause | Solution |
|---|---|
| Ignition system | Check the ignition system |
| Open or short in IGF1 or IGT4 circuit between ignition coil with igniter and ECM | Inspect the IGF1 or IGT4 circuit |
| No. 4 ignition coil with igniter | Replace the No. 4 ignition coil with an igniter |
| ECM | Replace the ECM |
Check the Ignition System
The first step in resolving the Toyota Code P0354 is to check the ignition system for any faults. This includes checking for worn-out spark plugs, damaged wiring, or any other issues causing the problem. If any of these components are faulty, they should be replaced or repaired.
Inspect the IGF1 or IGT4 Circuit
The next step is to inspect the IGF1 or IGT4 circuit between the ignition coil with the igniter and the ECM. If there is an open or short in this circuit, it could be causing the issue and should be repaired or replaced.
⚡️Other article: Toyota Code B1821/55
Replace the No. 4 Ignition Coil with Igniter
If the IGF1 or IGT4 circuit is not the issue, the next step is replacing the No. 4 ignition coil with an igniter. This may be necessary if the coil is damaged or worn out and needs to be replaced.
Replace the ECM
Finally, if the above steps have been completed and the issue is still present, the ECM may cause the problem. In this case, it is necessary to replace the ECM to resolve the issue.
Conclusion
The Toyota Code P0354 is an important diagnostic code that can help identify issues in the ignition system. To fix this problem, it is important to understand the potential causes and solutions, such as checking the ignition system, inspecting the IGF1 or IGT4 circuit, replacing the No. 4 ignition coil with an igniter, and replacing the ECM. If all of these steps are followed, resolving the issue and getting the engine running again should be possible. By following these steps, fixing the Toyota Code P0354 and getting the engine running again will be possible.
📢Read also: Toyota Code P0776