Volkswagen Code P2010 is an engine trouble code related to the Intake Manifold Runner Control Circuit. This code is triggered when there is a short to the B+ Bank 1 or when the tumble flap is commanded on engine speed >80 RPM. This code can be difficult to identify and fix and can lead to
Volkswagen Code P0491 is a diagnostic trouble code that indicates a secondary air system insufficient flow. This code is specific to Volkswagen vehicles, and is often found in 7.150kg/h Delta engine load, -10.10% rev ECT, 5.60° C IAT, 5.40° C altitude, and less than 2700 m SAI pressure sensor, ready no fault. This code is
Volkswagen Code P0887 is a diagnostic trouble code (DTC) that relates to the control circuit of the Transmission Control Module (TCM) power relay. This code is indicative of an issue with the solenoid valves in the valve body, which can be caused by a variety of factors. It is important to diagnose and repair the
When a Volkswagen owner is experiencing a problem with their vehicle, it is important to be aware of what a code P0785 means. The code is defined as a Shift/Timing Solenoid and indicates that the engine is running and the vehicle is driven, but the ECM detects a mechanical malfunction within the transmission. A code
Volkswagen Code P0599 is a code that indicates a thermostat heater control circuit high. This code can be caused by a variety of issues such as a low or insufficient battery voltage, blown fuses or open circuits, a faulty voltage regulator, a thermostat heater control issue, or a failed ECM. Understanding the possible causes and
The Volkswagen Code P0236 is a diagnostic trouble code that indicates a fault in the Turbocharger Boost Sensor (A) Circ Control Range/Performance. This code can cause serious damage to the engine or automatic transmission if not properly addressed. Understanding the causes and potential solutions of this code can help prevent further damage and help with
Volkswagen Code P0763 is an A/T Shift Solenoid 3/C Electrical error that is detected when the ECM senses an unexpected voltage condition on the SS3/C solenoid circuit while the vehicle is running. The causes of this error include a damaged, open, or shorted Shift Solenoid 3/C connector, an open or shorted Shift Solenoid 3/C control
The Volkswagen Code P0411 is an error code indicating an issue with the Secondary Air Injection System. This code is triggered when the Engine Control Module (ECM) detects a problem with the Secondary AIR pump airflow, which means that the pump is functioning but the quantity of air is not enough. The error code is
When diagnosing and repairing a Volkswagen code P1421, it is important to understand the cause of the issue. P1421 is a code that indicates a secondary air injection valve circuit short to ground. This means the engine control module detects a short circuit to the ground when activating the secondary air injection solenoid valve. To
When it comes to Volkswagen vehicles, the code P310B is a common issue and can lead to a variety of problems with the car. This code is an indication that the fuel pressure regulation fluctuates and can be caused by a variety of different factors. These include a faulty fuel pressure regulator valve, faulty fuel
