- Check brake switch signal circuit
- Replace brake switch
- Replace PCM
- Check for a failing battery
When a driver is presented with the Isuzu code P0571, it is usually a sign of trouble. The code P0571 is a warning that the brake light switch circuit malfunctioned, which indicates that the car needs to be inspected and repaired. This code is triggered when the PCM detects that two brake switch signals do not agree with the brake switch status during the CCM test. In order to determine the cause of the code, it is necessary to look at the possible causes and solutions. This article will provide an overview of the possible causes and solutions of the Isuzu code P0571.
Causes and Solutions for Isuzu Code P0571
| Causes | Solutions |
|---|---|
| Brake switch signal circuit is open between switch and the PCM | Check brake switch signal circuit |
| Brake switch signal circuit is shorted to ground | Replace brake switch |
| Brake switch power circuit open between switch and 15A fuse | Replace PCM |
| Check the battery condition (it may have failed) | Check for a failing battery |
Check Brake Switch Signal Circuit
The first step in diagnosing the Isuzu code P0571 is to check the brake switch signal circuit. This circuit should be checked for any open or short circuits between the switch and the PCM. If any issues are found, they should be addressed immediately.
Replace Brake Switch
If the brake switch signal circuit is shorted to ground, the brake switch will need to be replaced. This can be done by removing the old switch and replacing it with a new one.
Replace PCM
If the brake switch power circuit is open between the switch and the 15A fuse, then the PCM will need to be replaced. This can be done by unplugging the old PCM and plugging in the new one.
Check for a Failing Battery
The last step in diagnosing the Isuzu code P0571 is to check the condition of the battery. The battery may have failed and needs to be replaced. This can be done by testing the battery for any signs of failure.
Conclusion
The Isuzu code P0571 is a warning sign of trouble, as it indicates a malfunction in the brake light switch circuit. In order to diagnose the code, it is necessary to look at the possible causes and solutions. The causes can range from a brake switch signal circuit being open between the switch and the PCM, to a brake switch being shorted to ground, to a brake switch power circuit being open between the switch and the 15A fuse. The solutions can range from checking the brake switch signal circuit, to replacing the brake switch, to replacing the PCM, to checking for a failing battery. By following these steps, drivers can be sure that they have correctly diagnosed and resolved the Isuzu code P0571. Overall, Isuzu code P0571 is a warning sign that should be taken seriously and dealt with quickly.
https://www.youtube.com/watch?v=nE0w473zOTQ