Jeep Code C2101-17 is a battery voltage high circuit voltage above threshold code that is generated when the battery voltage is above 16.5 volts with the ignition on and sensed ignition voltage is above 18 volts with vehicle speed above 6 km/h (4 mph). This code can be caused by the Powertrain Control Module (PCM) Charging System DTCs Present or the Anti-Lock Brake System (ABS) Module. The failure type is Circuit Voltage Above Threshold, which means the control module measures a voltage above a specified range, but not necessarily a short to battery.
🎯Suggested article: Jeep Code U1120
Causes and Solutions for Jeep Code C2101-17
| Cause | Solution |
|---|---|
| Powertrain Control Module (PCM) Charging System DTCs Present | Diagnose and troubleshoot the PCM with the appropriate diagnostic scan tool. |
| Anti-Lock Brake System (ABS) Module | Check for any fault codes associated with the ABS module and repair as needed. |
| Circuit Voltage Above Threshold | Verify that the voltage is within the specified range, and check for any loose or corroded connections. |
| Battery Voltage High | Check the battery for malfunctions or damage and replace or recharge as needed. |
It is important to diagnose Jeep Code C2101-17 correctly to ensure the proper functioning of the vehicle. This code can be caused by several issues, from the Powertrain Control Module (PCM) Charging System DTCs Present to the Anti-Lock Brake System (ABS) Module and Circuit Voltage Above Threshold and Battery Voltage High. The appropriate solutions for these causes vary, so it is important to recognize the cause to determine the most effective solution. Diagnostic scan tools can be used to troubleshoot the PCM, while fault codes associated with the ABS module should be checked. Additionally, the voltage should be verified within the specified range, and any loose or corroded connections should be checked. Lastly, the battery should be checked for malfunctions or damage and replaced or recharged.
🎯Suggested article: Jeep Code U110E
Conclusion:
Jeep Code C2101-17 is a battery voltage high circuit voltage above threshold code that can be caused by a variety of issues, from the Powertrain Control Module (PCM) Charging System DTCs Present to the Anti-Lock Brake System (ABS) Module, as well as Circuit Voltage Above Threshold and Battery Voltage High. To ensure the proper functioning of the vehicle, it is important to diagnose and troubleshoot the code correctly by using the appropriate diagnostic scan tools and checking for any loose or corroded connections. Additionally, the battery should be checked for malfunctions or damage and replaced or recharged as needed.
💥See also: Jeep Code P1757