Regarding Jeep diagnostics, the code P1757 is one of the most common codes encountered. Jeep code P1757 indicates that the Automatic Transmission Governor Pressure Sensor is above 3 PSI in gear at 0 MPH. It is important to understand the causes and solutions to this code so that the correct repair can be made to the vehicle. The underlying causes behind this code can range from a faulty Governor Pressure Sensor, a problem with the Transmission Valve Body, or even a PCM failure. If a Jeep owner is presented with this code, it is important to explore the potential causes and solutions to ensure a successful repair.
💥See also: Jeep Code P1CEA
Causes and Solutions for Jeep Code P1757
| Cause | Solution |
|---|---|
| Check for the presence of other A/T-related trouble codes | Scan the vehicle for additional codes and repair any underlying issues before proceeding |
| The Governor Pressure Sensor is damaged or has failed | Replace the Governor Pressure Sensor with a new one |
| The Governor Pressure Sensor VREF (5v) circuit is open or shorted | Inspect the wiring and connectors to the Governor Pressure Sensor and repair as necessary |
| The transmission valve body is leaking, damaged, or has failed | Replace the Transmission Valve Body with a new one |
| PCM has failed | Replace the PCM with a new one |
Check for Other Codes
When addressing a Jeep code P1757, the first step is to scan the vehicle for other Transmission-related trouble codes. This is important as other underlying issues may need to be addressed before further diagnostics can be performed. If no other codes are present, the next step is to check the Governor Pressure Sensor.
Governor Pressure Sensor
The Governor Pressure Sensor is responsible for monitoring the automatic transmission pressure at 0 MPH. If this sensor is damaged or has failed, it can cause the Jeep code P1757 to be present. To check if the Governor Pressure Sensor is the cause of the code, it should be inspected for any signs of damage or corrosion. If no signs of damage are present, the wiring and connectors to the sensor should be checked for any signs of corrosion or damage. If any signs of damage are present, the wiring and connectors should be repaired or replaced. If the wiring and connectors are in good condition, the Governor Pressure Sensor should be replaced with a new one.
👀Look at this: Jeep Code C1015
Transmission Valve Body
The Transmission Valve Body controls the flow of transmission fluid to the various parts of the automatic transmission. If the Valve Body is damaged or has failed, it can cause the Jeep code P1757 to be present. To check if the Valve Body is the cause of the code, it should be inspected for any signs of damage or corrosion. If any signs of damage are present, the Valve Body should be replaced with a new one.
PCM Failure
The Powertrain Control Module (PCM) controls the various systems in the vehicle. If the PCM fails, it can cause Jeep code P1757 to be present. To check if the PCM is the cause of the code, it should be inspected for any signs of damage or corrosion. If any signs of damage are present, the PCM should be replaced with a new one.
Conclusion: Resolve Jeep Code P1757 for a Successful Repair
When Jeep owners encounter code P1757, exploring the potential causes and solutions is important to ensure a successful repair. The underlying causes behind this code can range from a faulty Governor Pressure Sensor, a problem with the Transmission Valve Body, or even a PCM failure. By understanding these potential causes and solutions, Jeep owners can take the necessary steps to address the code and ensure their vehicle runs correctly. By taking the steps required to identify and repair the underlying cause of Jeep Code P1757, Jeep owners can ensure that their car is repaired correctly and that the issue is properly resolved.
🚀Recommended article: Jeep Code P0058