When it comes to modern vehicles, troubleshooting and diagnosing issues that arise can be a daunting task. This is especially true for Dodge vehicles, which require specific knowledge and expertise to pinpoint the root of the problem. One code that can be commonly found in Dodge vehicles is the P0708 code, which is an indication of a faulty Transmission Range Sensor Circuit. This code is associated with a wide range of problems, from a faulty Transmission Range Sensor to a malfunctioning Transmission Control Module. It is essential to understand the causes and solutions for the Dodge Code P0708 in order to get your vehicle back on the road.
⚡️Other article: Dodge Code P1705
Causes and Solutions for Dodge Code P0708
| Cause | Solution |
|---|---|
| TRS Sense Circuit Short to Voltage | Check the TRS wires and connectors for shorts or corrosion and replace any damaged components. |
| Two TRS Sense Circuits Shorted Together | Inspect the wiring and connectors of the TRS circuits and replace any parts that may have become worn or corroded. |
| Transmission Range Sensor | Test the Transmission Range Sensor for proper voltage and replace it if necessary. |
| Transmission Control Module | Check the Transmission Control Module for any possible issues and replace or reprogram it if necessary. |
TRS Sense Circuit Short to Voltage
When the Dodge Code P0708 is triggered due to a TRS Sense Circuit short to voltage, the first step is to inspect the wiring and connectors of the TRS circuits. If any of these components appear to be worn or corroded, they should be replaced. It is also important to test the Transmission Range Sensor for proper voltage and replace it if necessary.
Two TRS Sense Circuits Shorted Together
When two TRS Sense Circuits are shorted together, the wiring and connectors of the TRS circuits must be closely inspected. Any parts that appear to be worn or corroded should be replaced. Additionally, the Transmission Range Sensor should be tested for proper voltage and replaced if necessary.
⚡️Other article: Dodge Code P000B
Transmission Range Sensor
The Transmission Range Sensor should be tested for proper voltage when the Dodge Code P0708 is triggered. If the voltage readings are not within the normal range, then the sensor should be replaced. It is also important to check the Transmission Control Module for any possible issues and replace or reprogram it if necessary.
Transmission Control Module
The Transmission Control Module should be checked for any possible issues when the Dodge Code P0708 is triggered. If any issues are found, the module should be replaced or reprogrammed as necessary.
Conclusion
When diagnosing and troubleshooting Dodge vehicles, it is essential to understand the causes and solutions for the Dodge Code P0708. This code is typically associated with a faulty Transmission Range Sensor or a malfunctioning Transmission Control Module. By closely inspecting the TRS wires and connectors for shorts or corrosion, testing the Transmission Range Sensor for proper voltage, and checking the Transmission Control Module for any possible issues, you can ensure that your Dodge vehicle is running smoothly and safely. If you’re experiencing the Dodge Code P0708, make sure to take the necessary steps to diagnose and resolve the issue quickly and efficiently.
⚡️Other article: Dodge Code U1110