Chevrolet Code P0036 is used to describe an issue with the HO2S Heater Control Circuit Bank 1 Sensor 2. The code is triggered when the ECM detects that the driver’s commanded state and the control circuit’s actual state do not match for a period exceeding 7 seconds. This can be due to P0030, P0036, P0050, or P0056. When the ignition voltage is between 11-32 volts and the engine speed is more significant than 400 RPM, the DTCs run continuously when the conditions are met for one second.
🚨You may be interested in: Chevrolet Code U1301
Causes and Solutions for Chevrolet Code P0036
| Cause | Solution |
|---|---|
| P0030, P0036, P0050, or P0056 | Check the wiring and connectors for any loose connections or damaged wires. |
| The ECM detects that the driver’s commanded state and the control circuit’s actual state do not match for more than 7 seconds. | Replace the HO2S Heater Control Circuit Bank 1 Sensor 2 if necessary. |
| The ignition voltage is between 11-32 volts. | Ensure the battery voltage is correct. |
| The engine speed is more significant than 400 RPM. | Check the engine sensors and the ignition system. |
P0030, P0036, P0050, or P0056
When the conditions of Chevrolet Code P0036 are met, it is likely that the wiring and connectors are either loose or damaged. A technician should inspect the wiring and connectors to ensure they are securely connected. If the wiring or connectors appear to be in good condition, the ECM or O2 sensor may need to be replaced.
📢Read also: Chevrolet Code P0646
The ECM detects that the driver’s commanded state and the control circuit’s actual state do not match for more than 7 seconds.
If the Chevrolet Code P0036 is triggered due to a mismatch between the driver’s commanded state and the control circuit’s actual state, the HO2S Heater Control Circuit Bank 1 Sensor 2 may need to be replaced. A technician should inspect the sensor to determine if it needs to be replaced.
The ignition voltage is between 11-32 volts.
When the ignition voltage is between 11-32 volts, the DTCs run continuously when the conditions are met for one second. The battery voltage should be checked and adjusted as necessary to resolve this issue.
The engine speed is more significant than 400 RPM.
When the engine speed is more significant than 400 RPM, the technician should inspect the engine sensors and the ignition system. If any of the sensors malfunction, they should be replaced. Additionally, any damaged or worn-out components in the ignition system should be replaced.
Conclusion
Chevrolet Code P0036 is used to describe an issue with the HO2S Heater Control Circuit Bank 1 Sensor 2. Possible causes for this code include P0030, P0036, P0050, or P0056, the mismatch between the commanded state of the driver and the actual state of the control circuit, ignition voltage between 11-32 volts, and engine speed greater than 400 RPM. To troubleshoot this code, the technician should check the wiring and connectors, replace the HO2S Heater Control Circuit Bank 1 Sensor 2 if necessary, ensure the battery voltage is correct, and inspect the engine sensors and the ignition system. By correctly diagnosing and addressing the causes of Chevrolet Code P0036, the technician can ensure that the vehicle is running correctly and safely.