Solution: Inspect the (T752) Starter Relay Control circuit for any shorted to voltage, shorted to ground, open, or high resistance. Repair any shorted to voltage, shorted to ground, loose, or high resistance as required.
Chrysler Code P0615 is a common error code for vehicles manufactured by Chrysler. This code signals that the Starter Control Circuit is open and is triggered when the Engine Control Module (ECM) detects that the (T752) Starter Relay Control circuit is open for 1.0 seconds. While this code is most common amongst Chrysler vehicles, it can be seen in other cars, as well. To identify the causes and solutions of the code P0615, the common factors must be considered. The following table will show the causes and solutions for the code P0615.
Causes and Solutions for Chrysler Code P0615
| Cause | Solution |
|---|---|
| INTERMITTENT DTC | Inspect the (T752) Starter Relay Control Circuit and repair any faulty connections. |
| (T752) STARTER RELAY CONTROL CIRCUIT SHORTED TO VOLTAGE | Check the circuit wiring for any shorts or damages to the Voltage |
| (T752) STARTER RELAY CONTROL CIRCUIT SHORTED TO GROUND | Check the circuit wiring for any shorts or damages to the Ground |
| (T752) STARTER RELAY CONTROL CIRCUIT OPEN OR HIGH RESISTANCE | Check the circuit wiring for any open or high-resistance connections |
| STARTER RELAY | Replace the Starter Relay with a new one if necessary |
| ENGINE CONTROL MODULE (ECM) | Replace the ECM if necessary |
Chrysler Code P0615 indicates that the Starter Control Circuit is open, and the Engine Control Module (ECM) has detected that the (T752) Starter Relay Control circuit is available for 1.0 seconds. This is a common error amongst Chrysler vehicles but can be seen in other cars as well. The cause of this error can vary, but the most common issues are related to the Starter Relay, the (T752) Starter Relay Control Circuit, and the Engine Control Module (ECM). To determine the cause and find the solution, it is important to know the various reasons and solutions associated with Chrysler Code P0615. The following table overviews the different causes and solutions for the code P0615.
Intermittent DTC
When it comes to Chrysler Code P0615, an intermittent DTC may be the cause. This means that the ECM detects an issue with the (T752) Starter Relay Control circuit, but the problem is not constant and can come and go. To identify and solve this issue, it is important to inspect the (T752) Starter Relay Control Circuit and repair any faulty connections.
(T752) Starter Relay Control Circuit Shorted to Voltage
Another common cause of the code P0615 is a shortage of Voltage in the (T752) Starter Relay Control Circuit. In this case, the ECM detects that the (T752) Starter Relay Control Circuit is shorted to the voltage supply. To fix this issue, it is necessary to check the circuit wiring for any shorts or damages to the Voltage.
(T752) Starter Relay Control Circuit Shorted to Ground
The code P0615 can also be caused by a shorted-to-ground in the (T752) Starter Relay Control Circuit. In this case, the ECM detects that the (T752) Starter Relay Control Circuit is shorted to the ground. To resolve this issue, it is important to check the circuit wiring for any shorts or damages to the Ground.
(T752) Starter Relay Control Circuit Open or High Resistance
The code P0615 can also be caused by an open or high-resistance connection in the (T752) Starter Relay Control Circuit. In this case, the ECM detects that the (T752) Starter Relay Control Circuit is open or has a high resistance connection. To fix this issue, it is necessary to check the circuit wiring for any loose or high-resistance links.
Starter Relay
In some cases, the code of a faulty Starter Relay can cause P0615. In this case, the ECM detects that the Starter Relay is malfunctioning. To resolve this issue, it is necessary to replace the Starter Relay with a new one if necessary.
Engine Control Module (ECM)
Finally, the code P0615 can be caused by a faulty Engine Control Module (ECM). In this case, the ECM detects that the (T752) Starter Relay Control Circuit is open for 1.0 seconds and cannot control the Starter. To fix this issue, it is necessary to replace the ECM if necessary.
Conclusion
Chrysler Code P0615 is a common error code for vehicles manufactured by Chrysler. This code signals that the Starter Control Circuit is open and is triggered when the Engine Control Module (ECM) detects that the (T752) Starter Relay Control circuit is open for 1.0 seconds. To identify the causes and solutions of the code P0615, the common factors must be considered. The most common causes of the code P0615 are related to the Starter Relay, the (T752) Starter Relay Control Circuit, and the Engine Control Module (ECM). To resolve the issue of Chrysler Code P0615, it is important to identify the root cause and take the necessary steps to fix the problem.