When diagnosing and troubleshooting problems with Ford vehicles, the code P0332 is an essential indicator of an issue. This code indicates that the Knock/Combustion Vibration Sensor 2 Circuit Low (Bank 2) has been detected. This code is triggered when the vehicle’s voltage level falls outside the calibrated range. The Knock Sensor 2 (KS2) detects vibrations when the engine RPM is increased or decreased, and it generates a voltage based on the vibrations it detects. To diagnose and solve the problem, the vehicle must be driven for several minutes for the code to be set.
🎯Suggested article: Ford Code P1500
Causes and Solutions for Ford Code P0332
Cause | Solution |
---|---|
KS2+ circuit open | Check and repair circuit connections |
KS2- circuit open | Replace any damaged wiring |
KS2+ circuit short to ground | Inspect and replace any damaged components |
KS2- circuit short to ground | Check for loose connections or corrosion |
Knock Sensor 2 Circuit Open
When Ford code P0332 is detected, the Knock Sensor 2 (KS2) circuit will likely open. Several components, including a faulty wiring harness, a corroded connector, or a knock sensor, can cause this. To fix this issue, it is recommended that the wiring harness be inspected for any loose connections or corrosion, and the connectors should be checked for any damage.
🎯Suggested article: Ford Code P052B
Knock Sensor 2 Circuit Short to Ground
If the Ford code P0332 is detected, the Knock Sensor 2 (KS2) circuit may be shorted to ground. Various components, including a damaged wiring harness, a faulty knock sensor, or a corroded connector, can cause this. To fix this issue, the wiring harness should be inspected for any damage, and the connectors should be checked for corrosion. Additionally, the knock sensor should be replaced if it is faulty.
🚨You may be interested in: Ford Code P014A
Conclusion
Ford Code P0332 is an essential indicator of an issue and can be caused by various components, such as a faulty wiring harness, a corroded connector, or a faulty knock sensor. To diagnose and solve the problem, the vehicle must be driven for several minutes to set the code. Furthermore, the wiring harness should be inspected for any loose connections or corrosion, and the connectors should be checked for damage. Additionally, the knock sensor should be replaced if it is faulty. It is essential to ensure that all components are checked and returned to prevent further damage to the vehicle.
💥See also: Ford Code P2096