A GMC Code C0110 61 is an ignition ON system with a pump motor commanded to turn on, off, and on again. When the pump motor continues to rotate after activation, a binding or stalled pump motor will be indicated by a measured feedback voltage. This failure type is known as a Signal Calculation Failure, an algorithm-based calculation failure. To properly diagnose and repair the cause of this failure, it is important to understand what can lead to the GMC Code C0110 61 and the solutions that can solve the problem. This article will provide an overview of the causes and solutions of GMC Code C0110 61 to help diagnose and repair it.
📢Read also: GMC Code B0014 04
Causes and Solutions of GMC Code C0110 61
| Causes | Solutions |
|---|---|
| Incorrectly installed or damaged components | Replace or repair the component |
| Faulty wiring connections | Check and improve any faulty wiring connections |
| Defective pump motor | Replace the bad pump motor |
| Dirty or contaminated fuel tank | Clean the fuel tank and replace the fuel filter |
Incorrectly Installed or Damaged Components
Incorrectly installed or damaged components can cause the GMC Code C0110 61. This can include poorly connected wires, damaged relays, and faulty sensors. To fix this issue, the part must be replaced or repaired.
Faulty Wiring Connections
Faulty wiring connections can also cause the GMC Code C0110 61. In this case, the wiring must be carefully inspected to identify any loose or broken links. Once these connections are identified, they must be repaired to resolve the issue.
💥See also: GMC Code B1000 00
Defective Pump Motor
Another possible cause of the GMC Code C0110 61 is a defective pump motor. If the pump motor is bad, it must be replaced to resolve the issue.
Dirty or Contaminated Fuel Tank
A dirty or contaminated fuel tank can also cause the GMC Code C0110 61. In this case, the fuel tank must be cleaned and the fuel filter must be replaced in order to resolve the issue.
Conclusion
In conclusion, the GMC Code C0110 61 is an ignition ON system with a pump motor that has been commanded to turn on, off, and on again. This failure type can be caused by a variety of issues, including incorrectly installed or damaged components, faulty wiring connections, a defective pump motor, and a dirty or contaminated fuel tank. To properly diagnose and repair the cause of this failure, it is important to understand the causes and solutions of GMC Code C0110 61. By understanding the causes and explanations of the GMC Code C0110 61, you can properly diagnose and repair the issue.
💥See also: GMC Code P008F