Jeep Code B1C14 is an important Driver Active Headrest Control Circuit Open diagnostic code. It is a fault-setting condition detected by the Occupant Restraint Controller (ORC) every 10ms. The ORC checks the circuit before and post-fault settings to ensure the code can be denatured within the same ignition cycle. This code will be set if the ORC detects an opening on the R676 Active Head Restraint 1st Row Driver Signal Circuit. There are several causes for this code set, including an R676 Active Head Restraint 1st Row Driver Signal Circuit Open or High Resistance, a faulty Driver Active Head Restraint, or a faulty ORC.
💥See also: Jeep Code P051D
Causes and Solutions for Jeep Code B1C14
| Cause | Solution |
|---|---|
| R676 Active Head Restraint 1st Row Driver Signal Circuit Open or High Resistance | Check the condition of the circuit and repair or replace any damaged components. |
| Faulty Driver Active Head Restraint | Replace the Driver’s Active Head Restraint with a new one. |
| Faulty Occupant Restraint Controller (ORC) | Replace the Occupant Restraint Controller with a new one. |
| Check the condition of the wiring | Replace any faulty wiring and ensure all connections are secure. |
When the Jeep Code B1C14 appears, it is important to troubleshoot the issue quickly and effectively. The code refers to the Driver Active Headrest Control Circuit Open and is detected by the Occupant Restraint Controller (ORC) every 10ms. It will set a code if the ORC detects an opening on the R676 Active Head Restraint 1st Row Driver Signal Circuit. The causes of the code set may include an R676 Active Head Restraint 1st Row Driver Signal Circuit Open or High Resistance, a faulty Driver Active Head Restraint, a faulty ORC, or faulty wiring. The solutions to the Jeep Code B1C14 may involve checking the condition of the circuit and repairing or replacing any damaged components, replacing the Driver Active Head Restraint, replacing the Occupant Restraint Controller, and replacing any faulty wiring, and ensuring all connections are secure.
Check the Condition of the Circuit and Repair or Replace Any Damaged Components
The first step in resolving the Jeep Code B1C14 is to inspect the condition of the circuit and repair or replace any damaged components. The R676 Active Head Restraint 1st Row Driver Signal Circuit may have an open or high resistance. The technician must use a voltmeter to check the circuit’s voltage and ensure it is within the acceptable range. If any components are damaged or malfunctioning, they must be replaced.
🚀Recommended article: Jeep Code C2101-17
Replace the Driver’s Active Head Restraint with a New One
If the Driver’s Active Head Restraint is faulty, it must be replaced with a new one. This is an important step when attempting to resolve the Jeep Code B1C14. The technician must inspect the Driver’s Active Head Restraint to ensure it is functioning properly and not causing any issues. If it is malfunctioning, it must be replaced.
Replace the Occupant Restraint Controller with a New One
If the Occupant Restraint Controller is faulty, it must be replaced with a new one. This is a crucial step to take when attempting to resolve the Jeep Code B1C14. The technician must inspect the ORC to ensure it is functioning properly and not causing any issues. If it is malfunctioning, it must be replaced.
Replace Any Faulty Wiring and Ensure All Connections are Secure
The last step in resolving the Jeep Code B1C14 is to replace faulty wiring and ensure all connections are secure. Faulty wiring can cause the code to be set and must be identified and repaired. The technician must inspect the wiring and look for any signs of damage or looseness. If any wiring is damaged or not connected correctly, it must be replaced, and all connections must be checked and tightened.
Conclusion: Resolve Jeep Code B1C14 Quickly and Effectively
It is important to take the necessary steps to resolve the Jeep Code B1C14 quickly and effectively. The code refers to the Driver Active Headrest Control Circuit Open and is detected by the Occupant Restraint Controller (ORC) every 10ms. The causes of the code set may include an R676 Active Head Restraint 1st Row Driver Signal Circuit Open or High Resistance, a faulty Driver Active Head Restraint, a faulty ORC, or faulty wiring. The solutions to the Jeep Code B1C14 may involve checking the condition of the circuit and repairing or replacing any damaged components, replacing the Driver Active Head Restraint, replacing the Occupant Restraint Controller, replacing any faulty wiring, and ensuring all connections are secure. Jeep Code B1C14 can be quickly and easily resolved with the proper diagnosis and repair.
🚨You may be interested in: Jeep Code U0100