The MINI code P2402 indicates a glitch in the Evaporative Leak Detection Pump Control Circuit. Faulty components, aftermarket parts, and improper seals can all lead to this issue. To prevent this issue, the engine must be started, the battery voltage must be above 11.5v, all electrical components must be off, and the parking brake must be engaged. When the EVAP code P2402 is triggered, it is important to identify the root cause and the proper solution to repair the issue. Below is a table outlining the causes of EVAP code P2402 and their respective solutions.
🎯Suggested article: MINI Code P115C
Causes and Solutions for EVAP Code P2402
| Cause | Solution |
|---|---|
| EVAP LDP power supply circuit is open | Inspect and repair the circuit for any loose connections. |
| EVAP LDP solenoid valve is damaged, or it has failed | Replace the solenoid valve with a quality OEM part. |
| EVAP LDP canister has a leak or a poor seal | Replace the canister, gaskets, and hoses. |
| EVAP canister system has an improper seal | Check the seals for proper tightness and replace them if necessary. |
When dealing with car problems, the MINI code P2402 can be daunting and frustrating. The EVAP Leak Detection Pump Control Circuit is a vital vehicle component and must be properly maintained and inspected. When the code P2402 is triggered, the problem must be addressed quickly and correctly to avoid further damage to the car. To properly repair the issue, it is important to identify the root cause and understand the solutions available. The table above comprehensively lists the common causes and solutions for EVAP code P2402.
EVAP LDP Power Supply Circuit Is Open
When the EVAP Leak Detection Pump Control Circuit’s power supply circuit opens, it can lead to the MINI code P2402. In order to prevent damage to the vehicle, inspecting the circuit for any faulty connections is important. This can be done by checking the wiring and connectors for any signs of damage or corrosion. If any damage is found, the faulty connections must be repaired or replaced before the issue can be resolved.
EVAP LDP Solenoid Valve Is Damaged or Failed
The EVAP Leak Detection Pump Control Circuit’s solenoid valve is essential to prevent the MINI code P2402. If this component is damaged or has failed, replacing it with a quality OEM part is important. This will ensure proper operation and prevent any future issues related to the code P2402.
EVAP LDP Canister Has a Leak or Poor Seal
The EVAP Leak Detection Pump Control Circuit’s canister is crucial for the proper functioning of the vehicle. If this component has a leak or a poor seal, it can lead to the MINI code P2402. The canister, gaskets, and hoses must be replaced to fix this issue. This will prevent future problems related to the code P2402 and ensure proper vehicle operation.
EVAP Canister System Has an Improper Seal
If the EVAP canister system has an improper seal, it can lead to the MINI code P2402. It is important to check the seals for proper tightness to fix this issue. If any of the seals are loose, they must be replaced to prevent further damage to the vehicle.
Conclusion
The MINI code P2402 is an indication of a glitch in the Evaporative Leak Detection Pump Control Circuit. Faulty components, aftermarket parts, and improper seals can all lead to this issue. To prevent this issue, the engine must be started, the battery voltage must be above 11.5v, all electrical components must be off, and the parking brake must be engaged. When the MINI code P2402 is triggered, the root cause must be identified, and the proper solution must be implemented to repair the issue. The table above comprehensively lists the common causes and solutions for EVAP code P2402. With the right knowledge and understanding, the MINI code P2402 can be addressed quickly and correctly, allowing the vehicle to function properly and preventing further damage.