Understanding the Chrysler Code U0428 can be a difficult and daunting task. As the code indicates, the Implausible Data Received From the Steering Angle Sensor Module is an error message continuously received while the system is active. This error message is sent over from the Steering Angle Sensor (SAS) and can be caused by several issues. To better understand the Chrysler Code U0428 and identify potential causes and solutions, a table is provided below to help clarify the situation.
🚨You may be interested in: Chrysler Code P1614
Causes and Solutions for Chrysler Code U0428
| Cause | Solution |
|---|---|
| Open or Shorted Condition | Check the wiring or visible damage and the CAN Bus connector for proper fitment. |
| Steering Angle Sensor (SAS) / Steering Column Control Module (SCCM) | Check the wiring for visible damage, inspect the connector for proper fitment, and inspect for corrosion. |
| Powertrain Control Module (PCM) | Replace the PCM to correct the problem. |
| Improperly Installed Steering Angle Sensor (SAS) | Reinstall the SAS in the correct orientation and reset the SAS calibration. |
Diagnosing and repairing the Chrysler Code U0428 can be tricky, as the underlying cause of the code can be difficult to pinpoint. This code can be set due to various issues, from wiring shorts to steering angle sensor malfunctions. To ensure that the problem is properly addressed, it is important first to identify the cause of the issue. To help with this, the above table lists potential causes and solutions for the Chrysler Code U0428.
CAN BUS Open or Shorted Condition
Open or Shorted Condition is one of the possible causes of Chrysler Code U0428. This issue can be caused by faulty or damaged bus wiring or improperly fitting bus connectors. If this is the cause, inspecting the Bus wiring for visible damage and checking the CAN Bus connector for proper fitment is important.
Steering Angle Sensor (SAS) / Steering Column Control Module (SCCM)
The Steering Angle Sensor (SAS) and the Steering Column Control Module (SCCM) can also cause the Chrysler Code U0428. If this is the case, it is important to inspect the wiring for visible damage, inspect the connector for proper fitment, and look for corrosion.
🚨You may be interested in: Chrysler Code U0100
Powertrain Control Module (PCM)
Sometimes, the Powertrain Control Module (PCM) can cause the issue. If this is the case, replacing the PCM to correct the problem is important.
Improperly Installed Steering Angle Sensor (SAS)
If the Steering Angle Sensor (SAS) is improperly installed, this can also cause the Chrysler Code U0428. If this is the case, it is important to reinstall the SAS in the correct orientation and reset the SAS calibration.
Conclusion
Understanding and repairing the Chrysler Code U0428 can be a difficult and daunting task. Identifying the underlying cause of the code is the first step in fixing the issue, and the table provided above can help with this. From Open or Shorted Conditions to improperly installed Steering Angle Sensors, the possible causes of the Chrysler Code U0428 are varied. It is important to inspect the relevant components and identify the code’s cause to ensure that the problem is properly addressed.
👀Look at this: Chrysler Code P0615