Chrysler Code P1614

Chrysler Code P1614, which stands for ECU Reset-Recovery Occurred, is a diagnostic system that identifies the cause of a reset after the reset. This code is created by the Transmission Control Module (TCM) software and is stored in Random Access Memory (RAM). The reset can be triggered for various reasons, such as low battery voltage or a transmission control module (TCM). It is important to identify and address the underlying causes to prevent this code from occurring. I will outline the causes and solutions for Chrysler Code P1614 in this article.

Causes and Solutions for Chrysler Code P1614

Cause Solution
Low Battery Voltage Check battery voltage, charge as necessary, and monitor
Transmission Control Module (TCM) Repair or replace TCM if necessary
Overheating Check for clogged coolant lines and replace coolant as needed
Faulty wiring Inspect wiring and replace faulty connectors as necessary

Low Battery Voltage

Low Battery Voltage can trigger Chrysler Code P1614. It is important to check the battery voltage and charge it as necessary to solve this issue. If the battery voltage is low, the TCM cannot control the transmission properly, and a reset will occur. Therefore, monitoring the battery voltage and ensuring it is at the appropriate level is important.

⚡️Other article: Chrysler Code U0100

Transmission Control Module (TCM)

If the TCM is malfunctioning, Chrysler Code P1614 can be triggered. In this case, it is important to repair or replace the TCM, depending on the severity of the issue. It is important to ensure that the TCM is functioning properly to prevent the reset from occurring.


Another cause of Chrysler Code P1614 is overheating. If the coolant lines become clogged, the engine cannot dissipate heat, eventually leading to an engine reset. Therefore, it is important to check the coolant lines and replace the coolant as necessary to prevent overheating.

Faulty Wiring

Faulty wiring can also cause Chrysler Code P1614. If the wiring becomes damaged, there may be insufficient power to the TCM, and a reset may occur. Therefore, inspecting the wiring and replacing any faulty connectors as necessary is important.

👀Look at this: Chrysler Code P0615

Conclusion: How to Avoid Chrysler Code P1614

Chrysler Code P1614 can be caused by various issues, such as Low Battery Voltage, Transmission Control Module (TCM), Overheating, and Faulty Wiring. To avoid Chrysler Code P1614, it is important to identify and address the underlying causes. This includes checking the battery voltage, repairing or replacing the TCM, checking for clogged coolant lines, inspecting the wiring, and replacing faulty connectors. Following these steps, you can ensure your Chrysler vehicle is free from Chrysler Code P1614.

Rate this post

Leave a Comment