Ford code P0106 is a diagnostic trouble code triggered when the manifold absolute pressure (MAP) sensor input does not correlate with an inferred MAP value. Other DTCs usually accompany this code; it is essential to check for these codes and diagnose them first. The causes of this code can include a slow-responding MAP sensor, a damaged MAP sensor, or a damaged MAF sensor. The related service bulletins that go along with this code can be found in the links provided in the article. A table is provided below better to understand the causes and solutions of Ford code P0106.
🚨You may be interested in: Ford Code P0055
Causes and Solutions of Ford Code P0106
| Cause | Solution |
|---|---|
| Slow-responding MAP sensor | Replace the MAP sensor |
| Damaged MAP sensor | Replace the MAP sensor |
| Damaged MAF sensor | Replace the MAF sensor |
| Accompanied by other DTCs | Check for other DTCs and diagnose those first |
Ford code P0106 is a standard diagnostic trouble code triggered in Ford vehicles when the MAP sensor input does not match the inferred MAP value. This code is often accompanied by other DTCs, which should be checked and diagnosed before addressing the Ford code P0106. The causes of this code can include a slow-responding MAP sensor, a damaged MAP sensor, or a damaged MAF sensor. To adequately address this code, it is essential to understand its causes and solutions. The table below outlines the reasons and explanations for Ford code P0106 and the related service bulletins that can be used to investigate the issue further.
👀Look at this: Ford Code P1500
Slow Responding MAP Sensor
When Ford code P0106 is triggered, one of the possible causes is a slow-responding MAP sensor. When the MAP sensor is slow to respond to changes in engine load, the computer cannot accurately adjust the fuel delivery and ignition timing, resulting in a decrease in engine performance. The MAP sensor should be replaced with a new one to address this issue.
Damaged MAP Sensor
Another common cause of Ford code P0106 is a damaged MAP sensor. A damaged MAP sensor can cause inaccurate readings or no readings, resulting in decreased engine performance. The MAP sensor should be replaced with a new one to address this issue.
⚡️ Another article: Ford Code P052B
Damaged MAF Sensor
The MAF sensor can also be a cause of Ford code P0106. A damaged MAF sensor can cause inaccurate or no readings, resulting in decreased engine performance. The MAF sensor should be replaced with a new one to address this issue.
Accompanied by Other DTCs
Ford code P0106 is often accompanied by other DTCs, which should be checked and diagnosed before attempting to address the Ford code P0106. The related service bulletins can be found in the links provided in the article and should be consulted for further diagnosis of the issue.
👀Look at this: Ford Code P061C
Conclusion
Ford code P0106 is a standard diagnostic trouble code triggered in Ford vehicles when the MAP sensor input does not match the inferred MAP value. This code has multiple causes, such as a slow-responding MAP sensor, a damaged MAP sensor, or a damaged MAF sensor. The table in this article outlines the reasons and solutions for Ford Code P0106 and the related service bulletins that can be used to investigate the issue further.
💥See also: Ford Code P0332