Ford code P0230:14 is a continuous and on-demand diagnostic trouble code (DTC) set when the Body Control Module (BCM) detects a short to ground or open from the fuel pump relay coil circuit. This code can seriously impact a Ford vehicle’s engine performance and must be addressed as soon as possible. This article will discuss the causes and solutions of this problem, including the potential issues that can lead to the code being set. By understanding the causes and solutions to this code, Ford owners can ensure their vehicles stay running smoothly and safely for years to come.
🚀Recommended article: Ford Code P0073
Causes and Solutions for Ford Code P0230:14
| Cause | Solution |
|---|---|
| Faulty fuel pump relay | Replace the fuel pump relay |
| Short circuit in the fuel pump relay | Inspect the fuel pump relay wiring |
| Malfunctioning fuel pump | Replace the fuel pump |
| Corroded wiring | Clean the corroded wiring |
Faulty Fuel Pump Relay
When the Ford code P0230:14 is set, the BCM detected a problem with the fuel pump relay. The fuel pump relay controls the power supply to the fuel pump, which is responsible for supplying fuel to the engine. If the relay is faulty, it can cause the fuel pump to malfunction, leading to a decrease in engine performance. The solution to this problem is to replace the fuel pump relay with a new unit.
Short Circuit in the Fuel Pump Relay
A short circuit in the fuel pump relay can also cause the Ford code P0230:14 to be set. A wiring problem within the fuel pump relay typically causes this issue. When this occurs, the power supply to the fuel pump is interrupted, and the engine will not be able to get the necessary fuel to operate. The solution is to inspect the fuel pump relay wiring to identify and repair any short circuits.
🎯Suggested article: Ford Code P0106
Malfunctioning Fuel Pump
The fuel pump is responsible for supplying the engine with fuel, and if it is malfunctioning, it can lead to the setting of the Ford code P0230:14. If the fuel pump is malfunctioning, it will need to be replaced to restore proper engine performance.
Corroded Wiring
Corroded wiring can also cause the Ford code P0230:14 to be set. This issue is usually caused by the build-up of dirt and debris on the wiring, which can decrease the power supply to the fuel pump. The solution is to clean the wiring to remove any dirt or debris causing the problem.
Conclusion
The Ford Code P0230:14 can be caused by various issues, ranging from a faulty fuel pump relay to corroded wiring. By understanding the potential causes and solutions to this code, Ford owners can ensure their vehicle runs smoothly and safely. By addressing the root cause of the Ford Code P0230:14, Ford owners can ensure their cars stay running optimally for years.
💥See also: Ford Code P204C