Drivers of Ford cars may come across the dreaded Ford Code P1405, which can be troublesome to diagnose and repair. This code is associated with the DPFE (Delta Pressure Feedback EGR) Sensor. It is triggered when the PCM (Powertrain Control Module) detects an EGR flow in a negative direction, which typically means that the EGR valve is closed. To check for the cause of this code, you should check for any signs of icing in the upstream hose or wrong hose routing. The common reasons for this code are a disconnected DPF EGR sensor, a plugged DPF EGR sensor upstream hose, and a blocked or damaged EGR tube.
šRecommended article:Ā Ford Code P0106
Causes and Solutions for Ford Code P1405
Cause | Solution |
---|---|
DPF EGR sensor upstream hose is disconnected | Check hose connections and reconnect if necessary. |
DPF EGR sensor upstream hose is plugged (ice) | Thoroughly inspect and clean the hose or replace if necessary. |
EGR tube is plugged or damaged | Check for signs of damage and replace if necessary. |
PCM indicates EGR flow in a negative direction | Check the EGR valve and replace it if necessary. |
If youāre the owner of a Ford car and experiencing issues with Ford Code P1405, then youāre likely facing a difficult task in diagnosing and repairing the problem. The code is associated with the DPFE (Delta Pressure Feedback EGR) Sensor. It is triggered when the PCM (Powertrain Control Module) detects an EGR flow in a negative direction, which typically means that the EGR valve is closed. To check for the cause of this code, you should look for any signs of icing in the upstream hose, or wrong hose routing. The three most common causes for the Ford Code P1405 are a disconnected DPF EGR sensor, a plugged DPF EGR sensor upstream hose, and a blocked or damaged EGR tube. While this problem can be difficult to diagnose, with the right knowledge, you can repair it quickly and efficiently.
š„See also:Ā Ford Code P204C
Disconnected DPF EGR Sensor
If the DPF EGR sensor upstream hose is disconnected, youāll need to check the connections and reconnect them, if necessary. Make sure that the hose is properly connected to the EGR tube and the EGR valve, and check for any signs of damage. If the hose is damaged, you must replace it before proceeding.
Plugged DPF EGR Sensor Upstream Hose
If the DPF EGR sensor upstream hose is plugged, youāll need to inspect and clean it or replace it if necessary. Youāll also need to check for any blockage in the hose or EGR tube, as this could be causing the problem. If you find any blockages or obstructions, youāll need to remove them before you can continue.
Plugged or Damaged EGR Tube
If the EGR tube is plugged or damaged, youāll need to check for any signs of damage and replace it if necessary. Youāll also need to check that the EGR valve is working properly, as this could be the cause of the Ford Code P1405. Once youāve identified and repaired the source of the issue, you can reset the code and continue driving your car.
ā”ļøOther article:Ā Ford Code P204B
Conclusion: Solving Ford Code P1405 Issues
Ford Code P1405 is a troublesome issue to diagnose and repair, but you can quickly and efficiently fix the problem with the right knowledge. The most common causes for this code are a disconnected DPF EGR sensor, a plugged DPF EGR sensor upstream hose, and a blocked or damaged EGR tube. If youāre experiencing any of these issues, you should check the relevant parts and replace them if necessary. With the right approach, you can easily solve the Ford Code P1405 issues and get your car back on the road.