The GMC Code B0228 04 indicates a serious Recirculation Position Circuit Actuator issue. This code is triggered when the HVAC module is turned on and the door position varies greatly from the commanded door position. This can lead to a System Internal Failure, and as a result, it is important to understand the various causes and solutions associated with this code. Below is a table summarizing the reasons and answers of the GMC Code B0228 04.
🚨You may be interested in: GMC Code C0110 61
Causes and Solutions of GMC Code B0228 04
Cause | Solution |
---|---|
The door position signal circuit is less than three counts or greater than 253 counts. | Check the wiring and connectors for any signs of damage, corrosion, or loose connections. |
Control module Internal Failures | Replace the control module if necessary. |
The door position differs from the commanded one by more than 4 counts. | Check the actuator for any signs of damage, corrosion, or loose connections. |
Environmental conditions | Check the environmental conditions, such as temperature, humidity, etc., and make necessary adjustments. |
Understanding the Causes
The GMC Code B0228 04 is triggered when the door position varies from the commanded one. This can be caused by several factors, including the door position signal circuit being less than 3 counts or greater than 253 counts. This could indicate a wiring issue or loose connection; it is important to check for any signs of damage, corrosion, or loose connections. Another potential cause is a control module internal failure. If this is the case, the control module must be replaced.
⚡️Other article: GMC Code B0014 04
Checking the Actuator
The actuator controls the door position, and it is important to check for any signs of damage, corrosion, or loose connections. If the actual door position differs from the commanded door position by more than 4 counts, this could indicate a problem with the actuator. It is important to check the actuator and make necessary adjustments.
Monitoring Environmental Conditions
It is also important to monitor the environmental conditions such as temperature, humidity, etc., as they can affect the GMC Code B0228 04. If the environmental conditions are not suitable, it is necessary to make the required adjustments.
👀Look at this: GMC Code B1000 00
Conclusion
The GMC Code B0228 04 indicates a serious Recirculation Position Circuit Actuator issue. It is important to understand the various causes and solutions associated with this code, such as checking the wiring, connectors, and actuator and monitoring environmental conditions. It is also important to take the necessary steps to address the issue to avoid any further damage or system internal failure.